Misaligned slide out

[TXCoast]

Hello folks,

last night we had a mishap with our kitchen slide. I had unlocked my side(left) of the slide and hubby thought he had unlocked his side(right) of the slide. As I started to slide out we heard what we think a cog wheel tooth slip in the slide bar. I immediately stopped. He checked the bar and he hadn't quite unlocked the bar for the slide, So, now we are off on the slide. When the slide is out all the way the right side isn't out all the way. When we retract the slide back in the bottom left side is not flush on the outside. Any idea on how we can get this back on track? any thought or experiences are appreciated.
P.s. we have a 2016 Bay Star Sport

[Greenbarn1]

You now need to loosen the trans torque bushing running under slide usually accessible by opening basement storage door. You will need a pipe wrench to hold shaft and a wrench to go on bushing maybe a 1 1/2. Hold shaft with pipe wrench and use 1 1/2 wrench to loosen bushing. Once loose you can push slideout in and out moving on side or the other. Once they are equal and square again retighten bushing.

[TXCoast]

Thanks for the advice. He came home with a “crows foot” tool and got to working on it. He was able to adjust it just fine.

["007"]

Welcome to the forum.
A handy link you will find use for.
Enjoy, safe travels.