New DSDP, water pump upgrade

[MoHoGo]

Tried to go back in the threads to find info on upgrading the water pump to the aquajet for better water pressure, especially in the shower.

I would be interested in the opinions of those that have gone this way before. Basically is there any advantage or disadvantage on a higher gpm water pump or is the stock pump good enough.

Thanks

Jim

["007"]

Here is a thread that maybe of interest.

[jigsup]

Jim,

I upgraded the standard Remco Aquajet water pump to the high volume SHURFLO 4048, as a "special" on my upcoming MADP build. This is the water pump model Newmar installs in the Essex and King Aire.

[newmarpusher]

Originally Posted by campbell36

Tried to go back in the threads to find info on upgrading the water pump to the aquajet for better water pressure, especially in the shower.

I would be interested in the opinions of those that have gone this way before. Basically is there any advantage or disadvantage on a higher gpm water pump or is the stock pump good enough.

Thanks

Jim

Just to give you another data point. We have a 2015 Ventana 4037 with the standard water pump. The shower is the best shower we've had in a MH, ever. Plenty of pressure using the water pump.

We've had the MH for over two months and this weekend was the first time we've had water hookups - been using the pump until now.

[tomakat]

I upgraded the water pump on my 2015 DS4018 to the Shurflow 4048 and I also upgraded the faucet in the back bath. I have to be REALLY careful when I first turn on the faucet since it turns into a water cannon instead of a waterfall. In other words, the water shoots straight out. After the initial air is pushed out, then it behaves the way it's supposed to.