Join CruisersForum Today
Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
Newmar Owners Information (Help)
Old 10-29-2010, 08:21 AM   #1
Don M. is offline
Member
Don M.'s Avatar
Join Date: Jan 2009
Posts: 73
We have a dinette with 2 chairs and 2 folding. Our current table has 2 legs. We are in the process of installing Cabinets on each side of the table same design that came from the factory however ours did not come that way.
My question is if anyone has the table that has no legs on it.
The one that will pull out and is self supported. How did they fasten it and could I get a pic of it. I would like to see if it made different than my table. I really would like to get rid of those legs.
I'm in the process of making the cherry Cabinet's now and need to know if I need to do anything special.
Any help would be greatly appreciated.

__________________
DM
02 Mountain Aire 4095
05 Chevy Tahoe
  Reply With Quote
   
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-29-2010, 09:54 AM   #2
Matador 01 is offline
Junior Member
Matador 01's Avatar
Join Date: Jun 2010
Location: San Antonio, TX
Posts: 21
I think one of the Amish places in Indiana makes one of the desks with the table as you describe, if you google RV furniture you may find a picture of it. I made one for a friend of mine that has a Dutch Star, but was designed for the table to slide in and out under the center of the desk, they seem to like it real well...

__________________
2003 DSDP NKK 18052
  Reply With Quote
   
Old 10-29-2010, 12:04 PM   #3
Spikester is offline
Senior Member
Spikester's Avatar


Newmar Owners Club
Join Date: Aug 2007
Location: Belfair WA.
Posts: 612
We have an after-market table that has just one center leg, the table top sides in and out on rails that are secured to the wall cabinet. Center leg is not bother-some when sitting anywhere at the table.








Spike
__________________
2008 Newmar VTDP - 3330 - ISBXT 350 Spartan NVS
Toad - 2003 Mini Cooper
FMCA F113720, NKK 18573
  Reply With Quote
   
Old 10-29-2010, 03:18 PM   #4
"007" is online now
Community Moderator
"007"'s Avatar


Nor'easters Club
Newmar Owners Club
Workhorse Chassis Owner
Join Date: Oct 2004
Location: Salisbury,Ma. 01952
Posts: 13,609
If you click on the Quick Tips LINK ITEM#3, I will explain how to put in what I did for wife.
I have the full use of table with leaf left in the table while traveling and table can be pulled out from under the corian shelf when setup and slide out.
The reason we kept the table it was well designed and solid and good size if you want same size table you will still need a leg for support.
Observing wall mounted tables in friend coach's the wall mounted tables will begin to sage downward from wall because of weight. Even with a single leg support when placing hands on corner edge of table it will tend to push downward if using corner for support when raising from chair.
We have extra folding chair so five can sit at table.
We also have a folding coffee table in front of couch.
My wife likes to entertain her friends.
Used a cabinet door to match up to new cabinets under shelf, the new cabinets will age and darken as they get older.



Welcome to the Newmar forum.
__________________
98KS,99MA,03-KS-3740 W-22 & 6 Ford's 3 V-10's
VISIT the NEWMAR QUICK TIPS & EASYMODS1&2
QUICK TIPS # 3
RV SYSTEMS & APPLIANCES & RECALLS
  Reply With Quote
   
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My experience with Newmar factory service Parkerrs Newmar Owner's Forum 14 06-12-2010 06:12 PM
Newmar owners please help! TomVanderBie Newmar Owner's Forum 18 12-26-2009 12:03 PM
*UPDATED FIX* Dometic Sidewise (NDA1402) Owners CSX4350 Newmar Owner's Forum 19 12-11-2008 04:27 PM
No problems in the Newmar forum tonight "007" Newmar Owner's Forum 61 11-12-2006 01:03 PM
Hello, Newmar Owner's! KGSGinRV Newmar Owner's Forum 7 08-28-2006 11:02 AM

Download our Mobile App






1% for the Planet
» Upcoming Rallies
No events scheduled in
the next 365 days.
» iRV2 on facebook

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

RV & Travel Trailer Communities

Our RV & Travel Trailer sites encompasses virtually all types of Recreational Vehicles, from brand-specific to general RV communities.

» More about our RV Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities


Copyright 2002-2012 Social Knowledge, LLC All Rights Reserved.
All times are GMT -6. The time now is 10:41 AM.