No Dash gages working???

[Karl]

Stoped last night and went to move today and no dash gages working. Checked instument fuse and it was ok. anyone have any idears. Thanks

[Karl]

Stoped last night and went to move today and no dash gages working. Checked instument fuse and it was ok. anyone have any idears. Thanks

["007"]

Karl any luck with dash gages, are they working yet check ground wiring to dash area, or loose plug for dash connections, could have loosened up from vibrations.

[ajbjrvers]

To; Karl;

I have an02 MADP on a Spartan with Cummins.

Don't know set-up of 03 DSDP, but let me tell you where my fuse locations are, you may have same locations.

Removable panel on dash above instrument cluster, about 30 fuses and relays.

In the bay with the 50 amp power cord, 8-12 fuses behind plastic cover. Both covers ars secured with velcro.

As "007" stated, check grounding under dash and connections behind guages which can be seen when fuse cover on top of dash is off.

Hope this works and good luck== Aime=== AJBJRVERS

[Karl]

Found a fuse in the front generator compartment that was blowned, replaced it and everything worked but driving down the highway everything stoped again. I called Spartan and was told everything was controled by the speedometer, so have a new one on on order.Hope that solves it, for now carry extra fuses.

[Karl]

Forgor to say. I had a tech and myself check every wire connection and fuse and that was the only one that was bad and no connections were loose.