Community Forums

The_Edge · 02-22-2018, 09:51 PM

I have been using my Oasis heating asystem with the burner for the last couple of (cold) months, and now that its warmer, I switched the burner off and flipped the Oasis switch to AC heat. The AC heat light did not come on. I am hooked to 50 amps. I turned the Oasis off and on (on the main Oasis box underneath), and the AC light came on, on the box, briefly and then clicked off.

Any idea what the problem might be? I have a 2013 Newmar Dutch Star 4018. I checked the breaker, but eventhing looked fine. Is there another fuse or breaker that I should look for? It had been working the last time I used AC he

BattChief · 02-22-2018, 10:03 PM

The burner light is always on when selected, but the AC light only comes on when it is calling for heat. You can see this if you select both burner and AC and watch the lights when the burner comes on. The AC light should illuminate and then go off when the burner goes off because it's no longer calling for heat.

The_Edge · 02-22-2018, 10:13 PM

Quote:

Originally Posted by BattChief

The burner light is always on when selected, but the AC light only comes on when it is calling for heat. You can see this if you select both burner and AC and watch the lights when the burner comes on. The AC light should illuminate and then go off when the burner goes off because it's no longer calling for heat.

You are correct! After a bit, the light came on when needed.