Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 10-18-2014, 06:37 PM   #1
Member
 
dwmcg's Avatar
 
Newmar Owners Club
Join Date: Sep 2012
Location: Jonesboro, AR
Posts: 78
Oil pressure

Started out on the cummins forum. Have talked to Spartan. Hope to get some info here.Dash gauge for engine oil pressure does not read, Light has never come on and scan gauge shows 82 lbs at cold idle.I believe Newmar added their own oil pressure gauge and sender separate from cummins and the ecm but have not been able to find any info on it. Would anyone know and if so where is the sensor located? Sent Newmar an e-mail last Wed and have not heard back yet. Thanks.
__________________
2000 38' DSDP, Spartan chassis, 2015 Dodge Dart Toad, Blue Ox tow bar, 330 HP Cummins, Ready Brake, Trucenter
dwmcg is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 10-18-2014, 10:59 PM   #2
Senior Member
 
Skip426's Avatar


 
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,266
To the best of my knowledge the only gallery available for locating an oil pressure sender, is on the passenger side of the engine and any added sender would have to be installed along that gallery. Cummins location is item 11, in this diagram, there may be other plugs along that level that could be removed for an alternate install, or possible they installed a " T " for both senders in the same location.
Attached Thumbnails
Click image for larger version

Name:	ISC.Passenger side of engine.jpg
Views:	184
Size:	111.2 KB
ID:	76861  
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
Skip426 is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Low Water Pressure on City Water NINK Monaco Owner's Forum 15 06-09-2017 08:15 AM
Oil Change Interval slemnah Caterpillar Engine Forum 17 10-21-2014 10:33 AM
Low oil pressure | erratic oil pressure | inconsistant oil pressure GlennLever Cummins Engines 45 08-28-2014 08:24 AM
Oil pressure gauge reading incorrectly? captncrunch Alpine Coach Owner's Forum 6 05-24-2014 04:58 PM
Oil in my Winnebago View Joe View Sprinter Chassis Forum 16 03-07-2014 11:29 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.