Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 11-20-2016, 04:07 PM   #1
Senior Member
 
mikelm48's Avatar
 
Newmar Owners Club
Spartan Chassis
Join Date: Nov 2010
Location: Grapevine, TX
Posts: 974
Progressive Dynamics 9260 60 amp Conv/Charger

I am replacing my IOTA 55 amp Conv/Charger with the PD 9260. I have removed the IOTA and put the PD in place. I know this sounds dumb, but I can't see how the Pos and Neg wires connect to the unit. I mean I see the Pos and Neg locations, but I expected they would have a set screw to hold each of the wires. If anyone has installed one of these, I would appreciate an explanation on how the wires are secured at the Conv/Charger. I'm sure once I hear the answer I am going have one of those "duh, obviously" moments.
__________________

__________________
Mike
2005 Kountry Star 3907, ISC330, Spartan chassis, M&G braking, Blue Ox Aventa XL
mikelm48 is online now   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 11-20-2016, 05:47 PM   #2
Senior Member
 
puttin's Avatar
 
Winnebago Owners Club
Ford Super Duty Owner
Join Date: Dec 2009
Posts: 1,284
Have you looked down through the top area above the lugs? They should (or probably are) either allen or torx type screws. The last 55 A. converter I changed was like that. I didn't have the torx tool but got an allen key that worked fine. Your 9200 should also have the charge wizard...kind of a nice little feature.
__________________

__________________
puttin is offline   Reply With Quote
Old 11-21-2016, 12:26 PM   #3
Senior Member
 
mikelm48's Avatar
 
Newmar Owners Club
Spartan Chassis
Join Date: Nov 2010
Location: Grapevine, TX
Posts: 974
putting, you were correct, duh, don't know why I couldn't see them yesterday. Anyway, thanks for the input. It is done and working now.
__________________
Mike
2005 Kountry Star 3907, ISC330, Spartan chassis, M&G braking, Blue Ox Aventa XL
mikelm48 is online now   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New battery losing water with new 3 stage Professional Dynamics 9260 Charger macnut Class A Motorhome Discussions 9 06-25-2014 09:31 PM
Progressive Dynamics Craig H Class A Motorhome Discussions 9 12-26-2008 11:29 PM
Progressive Dynamics 9260 Installation-Done UFO Pilot MH-General Discussions & Problems 4 12-21-2008 06:52 AM
Progressive Dynamics 9260 Installation UFO Pilot MH-General Discussions & Problems 4 12-17-2008 05:20 PM
Buying a Progressive Dynamics 9145 converter Ol'Joe RV Systems & Appliances 4 07-20-2005 05:05 AM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.