Replacing a glass shower door for an "08" Ventana

[Tigershark]

Hello all,
I'm a newbie to the group and have a problem. Through my own (for lack of a better word) stupidity, I broke the glass shower door in my 2008 Ventana. I was trying to remove the door in order to have the glass replaced but have run into a problem doing so. It seems that the the door is on some kind of swivel but I can't figure out how to get the door off of this swivel.Can any one help??? Thanks

["007"]

Welcome Tigershark to the Newmar forum & irv2.
The top door bracket may have screws to be removed than door would lift out of bottom pivot point. The screws maybe on top of frame for door.
Hopefully someone with a 08 will chime in for a better answer if thats not the case.
Enjoy the forums and do post often.

[jjr4]

We also have an 08 Ventana but it sounds from your description that our shower door may be different. Ours is a three panel sliding door. To remove the panels you take off the plastic guides on the bottom of the door (inside the shower). Then you can lift the panel to disengage the rollers from the enclosed track at the top.
Hope this makes sense.
Enjoy your Ventana - We sure do.
Jeff