Screw Locations?

[Jimbo43]

Am Thinking about replacing my T.V.s one in front and bedroom. Where are the screws located that holds the wood frame. I think I have located the ones in the bedroom(under some plugs in the frame) how to get the plugs out without damaging the frame.
Thanks
Oh yeah, it is an 06 DS.

[Campin Cajun]

You can remove the plugs by just prying them out with a sharp knife. They should not be glued in place. It's just a tight fit that holds them there.

[Sky_Boss]

I drilled a small pilot hole into the plug, screwed in a small wood screw and then used pliers to pull them out. Obviously, they weren't reusable afterwards but there was no other option.

I think you can get plug to replace the old ones but, frankly, I didn't care.

[VP Chianese]

Originally Posted by Sky_Boss

I drilled a small pilot hole into the plug, screwed in a small wood screw and then used pliers to pull them out. Obviously, they weren't reusable afterwards but there was no other option.

I think you can get plug to replace the old ones but, frankly, I didn't care.

I was told to call Newmar with your Vin number and they will sell you a bag of the new ones.

["007"]

In QT's # 3 there are many conversions to LCD's to help you out if necessary.

[slowspokes1]

I did the same task on my 2007 Dutch Star. Just keep looking. When you find all of them you will do this:
In the bedroom I created a cabinet behind the new tv. Used furniture grade plywood trimmed with the removed framing wood and a piano hinge. A few mods inside and have a perfect place to store my printer, radios, etc (Never an inch goes unused.) Subsequent to taking this picture, I put an additional shelf behind the tv.
Kathy