Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-13-2012, 07:02 PM   #1
Member
 
fulltimereh's Avatar
 
Join Date: Dec 2009
Location: abbotsford
Posts: 33
Unhappy slide facia

need help. pulled a dummy thing today. had the slide in, and when i put it out again, a candle fell between inner and outer face,s of the slide. end result was i pushed the facia away from the slide wall.this is along the top of the slide. can someone tell me how the wood facia is held on. this in a 2002 mountain aire 4090 Thank,s Doug
fulltimereh is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-13-2012, 08:13 PM   #2
Moderator Emeritus
 
"007"'s Avatar
 
Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
If your finished trim has popped off metal fascia look behind the board and you may see industrial Velcro or it may have been glued on with a contact cement.
If not check with Newmar and have your coach build number and they should be able to tell you.
If your have your coach build number we could look up the COM_NET2 information on this forum it may tell us.
__________________
98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans
VISIT the NEWMAR QUICK TIPS & EASYMODS 1 & 2
QUICK TIPS # 3
RV SYSTEMS & APPLIANCES & RECALLS --- TECH INFORMATION
"007" is offline   Reply With Quote
Old 04-13-2012, 09:37 PM   #3
Member
 
fulltimereh's Avatar
 
Join Date: Dec 2009
Location: abbotsford
Posts: 33
facia

thanks for the reply 007. the material that has come loose is the top board or board,s along the top of the slide. they didn,t come right off.the center is out about an inch. I can see screw,s behind the facia that attach to the slide itself. I have to remove the board facia to re-secure the metal back to the slide out room and then re-instal the facia.there appear,s to be a nailed on moulding above and below the center board.As it sit,s I cannot see any attachment.I wondered if it was a glue on or as yu mention, vecro. my my what a mess I have got myself into. I don,t have the original bill,s of sale as I am the second owner. I did find the serial # and the vin #. don,t know if these will help. the serial # 9087 Thanks Doug
fulltimereh is offline   Reply With Quote
Old 04-14-2012, 04:07 PM   #4
Senior Member
 
Renden's Avatar
 
Newmar Owners Club
Join Date: Jun 2010
Location: New Brunswick CANADA
Posts: 688
Good luck -

Your coach number can be found in the bedroom closet on one of the Walls -
__________________
2006 Dutch Star DP 400 ISL-AutoMotion Shades
Spartan Chassis
Norcold out (1 more)
Renden is offline   Reply With Quote
Old 04-14-2012, 06:15 PM   #5
Member
 
fulltimereh's Avatar
 
Join Date: Dec 2009
Location: abbotsford
Posts: 33
fascia

Hello Renden. I looked high and low in the closet and couldn,t find anything. I did figure out how to get the fascia off,now on to the clean-up and replace everthing. thank,s everone for the replie,s. Doug
fulltimereh is offline   Reply With Quote
Old 04-19-2012, 04:35 PM   #6
Member
 
Texas Boomers Club
Freightliner Owners Club
Join Date: Nov 2009
Posts: 36
Fascia

My 1999 DSDP had a piece of the fascia come off, it was held on with double sided tape, not sure if factory did it or previous owner. I called Newmar and they recomended two sided tape or Velcro. After much thought, used Liquid nails. Holding great but if I ever have to remove the slide I might have a little trouble however I must say the repair is holding well.
capt Frank is offline   Reply With Quote
Old 04-20-2012, 09:57 AM   #7
Member
 
fulltimereh's Avatar
 
Join Date: Dec 2009
Location: abbotsford
Posts: 33
facia

capt. frank, thank yu for the reply. indeed it is held on with two sided tape. have the repair now completed. thank,s to all who replied. Doug
fulltimereh is offline   Reply With Quote
Reply

Tags
slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 05:30 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.