thanks for the reply 007. the material that has come loose is the top board or board,s along the top of the slide. they didn,t come right off.the center is out about an inch. I can see screw,s behind the facia that attach to the slide itself. I have to remove the board facia to re-secure the metal back to the slide out room and then re-instal the facia.there appear,s to be a nailed on moulding above and below the center board.As it sit,s I cannot see any attachment.I wondered if it was a glue on or as yu mention, vecro. my my what a mess I have got myself into. I don,t have the original bill,s of sale as I am the second owner. I did find the serial # and the vin #. don,t know if these will help. the serial # 9087 Thanks Doug