iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I'd start by contacting Newmar to get the correct size, both
length and diameter. Rollers come in many sizes. I got mine
from Thor. And later got another from Cass Hudson who makes
them. They are conveyor rollers.
When we changed the flooring in our Essex had to change the rollers on one slide and found out Newmar has over 100 different rollers. Most rollers can be removed by pushing in on the center pin. You can use 2x4's on the outside of slide out to raise the floor inside to work on rollers. Contact Newmar for details on raising slide inside to work on rollers.