Community Forums

slickcher · 03-21-2008, 10:42 AM

Just returned from the Perry Rally and thought I would share this experience with you. When setting up I found that the 2 port side slides would not work, but the remaining one did. A long story short--The ignition key has to be in the verticle position (take-out position) for the slides to operate. Somehow ours got turned to the far left, accessory position (blamed it on Rosie). So why did one slide still work you ask? According to the Newmar tech guy some coaches can be wired wrong from the ignition.
Interesting???
The Perry experience was great. First time for us, we will go back.

slickcher · 03-21-2008, 10:42 AM

Just returned from the Perry Rally and thought I would share this experience with you. When setting up I found that the 2 port side slides would not work, but the remaining one did. A long story short--The ignition key has to be in the verticle position (take-out position) for the slides to operate. Somehow ours got turned to the far left, accessory position (blamed it on Rosie). So why did one slide still work you ask? According to the Newmar tech guy some coaches can be wired wrong from the ignition.
Interesting???
The Perry experience was great. First time for us, we will go back.

"007" · 03-21-2008, 03:18 PM

I thought this was going to be a tough one. Thanks for the info.

slickcher · 03-26-2008, 03:25 PM

Thanks 007. You guys are a great source of information. I have learned a lot here, and have recommended the Forum to many RV friends. I would bet there is not a subject, or problem that you experts couldn't help with.

Many Thanks, Bob