|
07-17-2019, 10:29 PM
|
#1
|
Junior Member
Join Date: Aug 2016
Posts: 4
|
Tag axle hub is gone, gone!
Well, it didn’t cause any accidents.
Oh, and it didn’t tear up the motorhome at all.
Going down the rode between Mountain Home, ID and La Grande, OR, our left tag axle wheel, brakes, hub and pretty much everything separated from our RV. The spindle was damaged. This was caused by a seized wheel bearing. Our RV is a 1998 Newmar Kountry Star F53 chassis with a Granning hub. We have been bounced around from Newmar, to Ford, to Dexter, to Granning. It turns out that parts are no longer made for this hub. So we have sent emails to RV salvage yards. One no parts and two haven’t responded yet. Would you guys have any ideas?
__________________
Lee - USAF Disabled Veteran, Rob, Bitty (chorkie), and Nina (chihuahua)
1998 Newmar Kountry Star 3780 Gasser “Ms Reba”
Toad 2016 Honda Fit manual tranny “Miss Fit”
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
07-18-2019, 12:46 AM
|
#2
|
Senior Member
Monaco Owners Club Vintage RV Owners Club
Join Date: Sep 2014
Location: anywhere U.S.A, Currently back home in Thailand!
Posts: 4,245
|
Contact the truck shops in the area, including the truck stops that have shops, TA, Petro, etc. they will have the # of a axel refurbisher that can fix your axel, spindle, and get you back on the road! You do have the wheel, drum, and everything that came off your MH? Here is a Co. that does this type of repair.
Give them a call, see what you can find out! Also, if you are heading home, you can chain up the axel, and go on home, and then have someone fix it? Hope this gets you in the right direction! Rail!
About Axle Repair Company - Truck Repair Mobile Machine Shop
__________________
Retired, and "Always on Holiday!"
1996 Monaco Windsor 38PB, "Mona" 275 HP., 8.3 Cummins, 3060 Allison 6 speed, 2001 PT Cruiser, "Bailey"
|
|
|
07-18-2019, 11:11 AM
|
#3
|
Junior Member
Join Date: Aug 2016
Posts: 4
|
Nope
We have not been able to find the wheel, hub, brakes, tire, etc. We will check on getting the axle fixed up though.
__________________
Lee - USAF Disabled Veteran, Rob, Bitty (chorkie), and Nina (chihuahua)
1998 Newmar Kountry Star 3780 Gasser “Ms Reba”
Toad 2016 Honda Fit manual tranny “Miss Fit”
|
|
|
07-18-2019, 10:37 PM
|
#4
|
Senior Member
Monaco Owners Club Vintage RV Owners Club
Join Date: Sep 2014
Location: anywhere U.S.A, Currently back home in Thailand!
Posts: 4,245
|
Call your insurance Co. also, the parts that came off your MH are covered under comp.!
I had the same thing happen to my Semi trailer once, and my insurance covered everything except the failed bearing! Rail!
__________________
Retired, and "Always on Holiday!"
1996 Monaco Windsor 38PB, "Mona" 275 HP., 8.3 Cummins, 3060 Allison 6 speed, 2001 PT Cruiser, "Bailey"
|
|
|
07-18-2019, 11:24 PM
|
#5
|
Senior Member
Monaco Owners Club Workhorse Chassis Owner
Join Date: Aug 2002
Location: Clovis, CA, USA
Posts: 13,151
|
I'd call the insurance company too...you never know, they might just pick up the tab.
__________________
2004 Monaco La Palma 36DBD, W22, 8.1, 7.1 MPG
2000 LEXUS RX300 FWD 22MPG 4020 LBS
Criticism is easier than Craftsmanship
|
|
|
07-18-2019, 11:43 PM
|
#6
|
Senior Member
Forest River Owners Club iRV2 No Limits Club
Join Date: Jun 2017
Posts: 1,057
|
Dis brakes kit
Have you looked for a disc brake conversion kit. I think I seen somewhere that someone had converted theirs over. When I did it to an old car I got the new spindle and all in the kit.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|