iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
I assume you still have their web site link they may be able to provide the info you need to replace bulb or led.
Found the link on old thread you had about adjusting the mirror.
Some mirror's are held on by Velcro strips but wouldn't guess on this model.
This prompt reply from Remco customer service. "If you take a small screwdriver and press it against the narrow side of the lens, you should be able to release the tabs and remove the lens."
Just replaced both of mine. Got led lights at napa auto parts. The bulbs are sealed in the lens so you will get the hole thing. Once you pop out the lens you will find two wires feeding power, tag for proper polarity then wiggle and pull to remove. When I installed mine I coated the connections with grease to help with corrosion
__________________
Dave and Laura & two cats
02 Discovery with Accord toad
retired auto rv tech and teacher, wife rt nurse