Community Forums

park_ridge_dave · 01-25-2018, 01:58 PM

Hi,

2012 Ventana LE

The TV and surround sound just quit working this pm. I checked the breakers and I have 110VAC at the microwave (so the power conditioner is working). All of my TVs are with out power. I can turn on the inverter and I see no error code blinking. Is there a gfci that I am missing in the 110VAC wiring for the TVs?

Josh at the factory suggested that the inverter needs to be reset. So far the manual doesn't help me (the Magnum MM1212 manual). I am sure that it is probably something simple I just can't seem to get my arms around this????

Anybody got any experience on this?

Cheers,

Dave

Rotten-Red · 01-25-2018, 03:31 PM

There should be a reset button on the inverter.

joes2901 · 01-25-2018, 04:18 PM

Look for a GFIC under the cabinets above the galley for one, the bathroom may be where you find the other. Our less expensive coaches tend to have only 2 120 volt circuits for the recepticles, the heavier current items will have a breaker.

harleyjs · 01-25-2018, 04:24 PM

A small push button on the bottom or side of inverter, push in to reset! That’s how mine resets.

park_ridge_dave · 01-26-2018, 05:38 AM

Quote:

Originally Posted by harleyjs

A small push button on the bottom or side of inverter, push in to reset! That’s how mine resets.

Found the inverter. I had to reset the output breaker by "feel" you can't see the top of the inverter from the bay. Evidently, some other person (who lives with me in the rig) plugged an electric heater into that circuit and it "popped" the CB

Thanks guys!

Dave