RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login

Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-19-2019, 12:56 PM   #449
Junior Member
 
Join Date: Jun 2018
Location: nampa,idaho
Posts: 3
help

(SID) Unknown SID. Data Erratic, Intermittent Or Incorrect.
is what i get as a fault
1999 allegro bus m39
freightliner chassis
it worked but now no readings on cooling level and brake air
cummings engine diesel pusher
VIN: 4UZ6XLCAXXCF10164
Make:
Model:
Serial No: 45810656
Notes about the fault:

Fault Code: 251-2
Source: 128 (Engine)
SPN: 251
FMI: 2
Lamp: NA
Occurrence: 1
Desc: (SID) Unknown SID. Data Erratic, Intermittent Or Incorrect.

Freeze Frame
RPM: NA
Speed: NA
Temp: NA
Load: NA
Boost: NA
Torque: NA
__________________

angelspapa20 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-20-2019, 01:19 PM   #450
Member
 
Join Date: Jun 2011
Location: Walnut Creek, Ca
Posts: 35
Do not have absolute answer for you. But doubt that a 1999 coach would have air pressure or coolant level on any chassis.
__________________

__________________
Pat - Walnut Creek, CA
2000 Monaco Diplomat 36DS
2014 Honda CRV EX-L
cpat39 is offline   Reply With Quote
Old 04-20-2019, 01:26 PM   #451
Senior Member
 
BobGed's Avatar
 
Tiffin Owners Club
Freightliner Owners Club
Join Date: Oct 2008
Location: Land of the Washoe Zephyr
Posts: 2,421
Quote:
Originally Posted by angelspapa20 View Post
(SID) Unknown SID. Data Erratic, Intermittent Or Incorrect.
is what i get as a fault
1999 allegro bus m39
freightliner chassis
it worked but now no readings on cooling level and brake air
{snipped for brevity}
I was going to suggest you post this on the BlueFire forum where Mark the developer could see it, but it looks like you've already done that. He is busy so it might take some time for him to get back to you, but that is the thread I would monitor.
__________________
Bob, Sherron & Kinsey (Goldendoodle)
2017 Tiffin Phaeton 40QBH
2014 Jeep Cherokee Limited
BobGed is offline   Reply With Quote
Old 04-23-2019, 04:31 AM   #452
Senior Member
 
BobGed's Avatar
 
Tiffin Owners Club
Freightliner Owners Club
Join Date: Oct 2008
Location: Land of the Washoe Zephyr
Posts: 2,421
Hi All,

Version 3.6 has been released. It is going through the Apple approval process for IOS devices, but should be available for Win 10 and Android devices either now or shortly.

There are a lot of neat new options and fixes available in this release.

Here's a list of the updates:

View Dash Page

1. Fixed the 'Fuel Fill Up' message loop when showing the dash after connecting to the adapter and the Fuel Tanks option 'Use Calculated Fuel Level Gauge' is not checked.
2. Updated the J1708 filter for possible better data retrieval.
3. The J1708 Distance/Odometer filters now take into account the Odometer Offset (allows an odometer reading of more than 3 million miles).
4. A dash longer than the mobile device screen will now be truncated if the 'Scroll the Dash' option is not set.
5. Fixed the bug that caused the page to crash periodically.

Customize Dash Page

1. Added a 'Resize Dash' option that will resize a dash group using a decimal factor.
2. Added a 'Auto Resize Dash' option that will automatically resize a dash from a different mobile device screen resolution. This was internal in previous releases but now is an option to leave the dash as is and manually resize it.
3. Added a 'Snap to Grid' option that allows snapping of gauges to the the vertical and horizontal grids when they are dragged and dropped.
4. Added a 'Size to Grid' option that will adjust the gauges width and height to align with the grid when the gauges are snapped.
5. Added a 'Snap to Grid Widths' option that allow the setting of the grid vertical and horizontal widths.
6. Added a 'Use Gauge Template' option that will use the text or circular gauge template set in Customize Gauges for assiging default values to new gauges.
7. Removed all the default gauge value options in lieu of the 'Use Gauge Template' option.
8. Renamed 'Send Dash' to 'Upload Dash' that will upload a custom dash to the new BlueFire Dash Repository.
9. Added a 'Download Dash' option that will download a custom dash from the BlueFire Dash Repository.
10. Moved Dash Templates to the new BlueFire Dash Repository.
11. Added a 'Incorrect Orientation' alert whenever loading, merging, importing, or downloading a dash with a different orientation than the mobile device.
12. Added a 'Auto Save' message that occurs whenever the App performs an Auto Save.
13. The 'Lock All Gauges' option no longer defaults to new gauges.
14. The 'Scroll the Dash' option will automatically be set if an imported or downloaded dash requires it.
15. All imported and downloaded dashes will automatically be locked.
16. Circular gauge default values have changed to reflect more real-world values.
17. The default values for metric Circular gauges will round the gauge start and end values to the scale interval and round the gauge ranges to the sub-interval.
18. Rearranged the options on the page.

Customize Gauge Page

1. Added a 'Snap to Grid' option for snapping the gauge to the vertical and horizontal grids when it is dragged and dropped.
2. Added a 'Size to Grid' option that will adjust the gauge width and height to align with the grid when the gauge is snapped.
3. Added a 'Template Gauge' option that sets the gauge as a template gauge to be used in Customize Dash.
4. Removed 'Use Max Speed' as it is not relevant.
5. Fixed the 'Backup Gauge' and 'Restore Gauge' options so that they function properly.
6. Rearranged the options on the page.

Settings Page

1. Renamed the 'Theme' option to 'Font Size' and the 'Adjust Text Size' option to 'Adjust Font Size'.
2. The 'Odometer Offset' setting accepts commas as the 1,000 separator.
3. The 'Connect to Last Adapter' setting will be unchecked if the 'Use Bluetooth...' settings are changed.
4. Changing the 'Metric' setting only resets Circular Gauge's ranges instead of resetting the entire gauge.

Faults Page

1. J1708 faults are filtered for erratic data.
2. Added Freightliner Oasis, Spartan Chassis and Tiffin Powerglide to the Dealer Search feature.

About Page

1. Added a Getting Started button that displays the Getting Started document.

Other

1. Reduced the values of demo data for Odometer, Total Hours, Idle Hours, Total Fuel Used by one digit to reflect real world conditions.
2. Added a iOS check for not supporting Bluetooth Low Energy (for older iOS mobile devices).
3. Added a Windows 'Bluetooth not allowed' check to App startup.
4. Added a Windows 'App will terminate when Minimized' warning to App startup.
5. Added a Windows 'App termination' alert when the App is minimized that allows for canceling the minimizing.
6. Changed the Motorhome icon to reflect Class-A Motorhomes.
__________________
Bob, Sherron & Kinsey (Goldendoodle)
2017 Tiffin Phaeton 40QBH
2014 Jeep Cherokee Limited
BobGed is offline   Reply With Quote
Old 04-23-2019, 02:38 PM   #453
Senior Member
 
Jim A's Avatar
 
Join Date: Jun 2005
Posts: 1,565
3.6 for Android is available now. Not yet on Windows 10.
__________________
Jim A
'04 Alpine Coach 36' MDDS
Jim A is offline   Reply With Quote
Old 04-23-2019, 05:32 PM   #454
Senior Member
 
Join Date: Dec 2004
Location: Edmond, Oklahoma
Posts: 385
Now available on the Apple App Store!
__________________
2017 DSDP 4054 Spartan Chassis
BattChief is offline   Reply With Quote
Old 04-24-2019, 06:44 AM   #455
JWN
Junior Member
 
Join Date: Jan 2014
Posts: 7
Outside Temp

On my 2013 Freightliner the Outdoor Temp reading on BlueFire dash is about 10 degrees lower than actual. Anyone else see this anomaly?


Not sure if this is normal, but I asked Mark to have an offset for Outdoor Temp.



Would be nice to know if this is just my ECM or a general issue.


Thanks
Jeff
JWN is offline   Reply With Quote
Old 04-24-2019, 02:40 PM   #456
Senior Member
 
Join Date: Nov 2014
Posts: 2,044
Hi,

For a NEWMAR 2019 DS on a spartan chassis does it use the 9 pin J1939 green adapter?
__________________
2019 Dutchstar 4369 CPU Finished on May 17 heading home.
Canuck53 is offline   Reply With Quote
Old 04-24-2019, 03:10 PM   #457
Senior Member
 
BobGed's Avatar
 
Tiffin Owners Club
Freightliner Owners Club
Join Date: Oct 2008
Location: Land of the Washoe Zephyr
Posts: 2,421
Quote:
Originally Posted by Canuck53 View Post
Hi,

For a NEWMAR 2019 DS on a spartan chassis does it use the 9 pin J1939 green adapter?
Yes, and that should be true for anything 2017 and newer.
__________________
Bob, Sherron & Kinsey (Goldendoodle)
2017 Tiffin Phaeton 40QBH
2014 Jeep Cherokee Limited
BobGed is offline   Reply With Quote
Old 04-24-2019, 03:15 PM   #458
Senior Member
 
Join Date: Nov 2014
Posts: 2,044
Quote:
Originally Posted by BobGed View Post
Yes, and that should be true for anything 2017 and newer.
Thanks
__________________
2019 Dutchstar 4369 CPU Finished on May 17 heading home.
Canuck53 is offline   Reply With Quote
Old 04-25-2019, 03:44 PM   #459
Senior Member
 
Join Date: Dec 2004
Location: Edmond, Oklahoma
Posts: 385
I have a 2017 DSDP on a Spartan chassis, and was not getting any transmission data (gear selected, attained, temp). I had the adapter in the green plug, and just for grins and giggles, moved it to the black plug today. (I have both plugs under the dash) I actually get more data on the black plug, as the transmission data is now available. Other gauges still don't work, such as oil temp and exhaust temp, but now have transmission data available. If you don't get all the gauges you want, moved the adapter to the black plug and see if anything changes.
__________________
2017 DSDP 4054 Spartan Chassis
BattChief is offline   Reply With Quote
Old 05-02-2019, 04:51 AM   #460
Senior Member
 
Freightliner Owners Club
Join Date: Apr 2004
Location: Foothills, Yuma, Az
Posts: 943
Quote:
Originally Posted by gatorcq View Post
Just placed this on BlueFire Website
"Retried again 3/22/2019 time 0721 .
Bluetooth window - Paired -
Flashing Blue

During Connection - Flashing Blue, but will go solid Red, during connection process Bluetooth window, shows paired then connected, then back to paired.

Was unable to send event log, as a message Timed Out would appear.
Cleared Event Log, it still took 2 tries to send Event Log.

This hold problem has been happening since Jan. Quartzsite show when the Alfa Roadrunners purchased many units.

Do you have any CanBuss software that will allow data capturing?
What CanBuss software are you using to view the data online to the engine controller?

Spent the last 20 minutes doing setup and tweaking the gauges, after it connected.
Double Click on Trip and the Distance to Empty - APP Crashed. After that no connections again. Was able to send the event log.

this is getting annoying.
Okay, got this issue resolved.
Turns out Bluetooth and USB 3.0 or 3.1 have conflicts.
I use a 128G, USB 3.1 device, once I remove it, all is now well.
__________________
Dale&Susan, 08 Alfa Gold, DaGirlsRv Blog
2015 F-150XLT_1600W Solar_880 AmpHr
Magnum_MS2812
gatorcq is offline   Reply With Quote
Old 05-02-2019, 04:53 AM   #461
Senior Member
 
Freightliner Owners Club
Join Date: Apr 2004
Location: Foothills, Yuma, Az
Posts: 943
Quote:
Originally Posted by JWN View Post
On my 2013 Freightliner the Outdoor Temp reading on BlueFire dash is about 10 degrees lower than actual. Anyone else see this anomaly?


Not sure if this is normal, but I asked Mark to have an offset for Outdoor Temp.



Would be nice to know if this is just my ECM or a general issue.


Thanks
Jeff
Are you reading the data called "Inlet Temp"?
__________________
Dale&Susan, 08 Alfa Gold, DaGirlsRv Blog
2015 F-150XLT_1600W Solar_880 AmpHr
Magnum_MS2812
gatorcq is offline   Reply With Quote
Old 05-03-2019, 07:57 AM   #462
JWN
Junior Member
 
Join Date: Jan 2014
Posts: 7
Quote:
Originally Posted by gatorcq View Post
Are you reading the data called "Inlet Temp"?

Good idea, but no. I also monitor inlet temp separately. Mark gave me a test to do, which I will try once I get back to the coach.
__________________

JWN is offline   Reply With Quote
Reply

Tags
ace, replace, replacement



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coachmen: Best Option for Awning Replacement jcm3 Forest River Owners Forum 2 08-23-2016 12:02 PM
Roof Replacement, is it an option? GaDawgFan Winnebago Industries Owner's Forum 9 08-07-2014 07:07 PM
Entry Step Replacement Option EngineerMike Alpine Coach Owner's Forum 1 07-27-2011 11:24 PM
Is the diesel 'option' still an option? rough road iRV2.com General Discussion 9 03-26-2011 11:05 AM
Fridge dying replacement option dometic "new Dimension" wftree RV Systems & Appliances 2 01-04-2007 12:19 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.