|
07-10-2010, 08:10 PM
|
#1
|
Junior Member
Newmar Owners Club
Join Date: Jun 2010
Posts: 13
|
Water System Prob w/ 07 MADP
I am having difficulty getting my water system working. All winterized fine last fall. I could fill the water tank today, but nothing appears at the faucets. With a hose connection, tank overflows, but no water at faucets. Pump appears to suck in water through the winterization hose if valve turned that way. With hose water turned off, pump turns on but no water at faucets. Whole house filter cartridge was removed for these checks.
Any comments would be appreciated.
Herboni
2007 MADP
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
07-10-2010, 08:26 PM
|
#2
|
Senior Member
Join Date: Mar 2010
Posts: 124
|
Water system problem
Herboni- check to see if you have an extra shut off valve between the fresh water tank and the water pump - sometimes the manufactures like to 'HIDE' these things - also check the water pump filter if you have one- also do you have a bypass valve that has to be in place of the water filter? - another possibility is contaminants in the fresh tank plugging the outlet to the pump
|
|
|
07-11-2010, 05:38 AM
|
#3
|
Junior Member
Newmar Owners Club
Join Date: Jun 2010
Posts: 13
|
To RV Mech
Good suggestions. However, even with fresh water connected, I do not get water at the faucets. The valve position doesn't make a difference. The filter housing is in place- I solely removed the cartridge.
Herboni
2007 MADP
|
|
|
07-11-2010, 05:45 AM
|
#4
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
In your pump bay "not water bay" follow the water line from fresh water tank and make sure all the valves are turned so valve handle is in line with pipe. One exception the valve for winterizing hose will be closed, valve not in line with pipe.
Your hot water tank will have three valves turned for winterizing you now turn in opposite direction for summer use. You may not be able to see them all but there is a diagram on black plate showing valve setup.
Use a flashlight.
After you have done all this make sure water fill divert valve in water bay is straight up for city water service not turned to left for fresh water tank filling.
WELCOME to the NEWMAR forum and irv2 by the way.
|
|
|
07-11-2010, 06:26 AM
|
#5
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
herboni, here is a thread I found in Quick Tips & Mods that may help you also,
|
|
|
07-11-2010, 12:18 PM
|
#6
|
Junior Member
Newmar Owners Club
Join Date: Jun 2010
Posts: 13
|
Problem Solved!
The responses made me check the water hose/tank fill valve in more detail. It turns out that the plastic knob was never completely changing the valve to one or the other positions. With a new knob, all is working fine!
Thanks for everyone's help.
Herboni
2007 MADP
|
|
|
07-11-2010, 03:57 PM
|
#7
|
Senior Member
Join Date: Apr 2007
Location: Utah/Florida
Posts: 349
|
007,
If I'm not mistaken a 2007 MADP has a hydronic heating system (i.e.Aqua Hot) which includes hot water. Hence no bypass system because it doesn't have a hot water tank..........
__________________
2011 Tiffin Allego Bus 40QXP
450 hp Cummins ISL 9, Powerglide chassis
Toad, 2011 Honda CR-V
|
|
|
07-11-2010, 08:30 PM
|
#8
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
Thanks for that roni, not being a DP owner has its faults sometimes. I think he found his fill divert valve was the problem and he has what was pictured on thread I posted.
|
|
|
07-11-2010, 09:17 PM
|
#9
|
Senior Member
Join Date: Apr 2007
Location: Utah/Florida
Posts: 349
|
007,
You should get yourself a pusher and you won't regret it. Then you'll be right on top of all this stuff too !
You would never go back to gas !
__________________
2011 Tiffin Allego Bus 40QXP
450 hp Cummins ISL 9, Powerglide chassis
Toad, 2011 Honda CR-V
|
|
|
07-11-2010, 09:30 PM
|
#10
|
Moderator Emeritus
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
|
If I was only a young man and hit the PB. My daughter is ready to pull my keys in a couple of years , not if I can help it.
|
|
|
07-12-2010, 08:10 PM
|
#11
|
Member
Join Date: May 2005
Posts: 66
|
Where can I get " just the plastic handle" ? I would like a spare one. On my previous coach, dealer said must order new valve to get the handle. The water fill diverter and drain valve have the same handle.
|
|
|
07-12-2010, 08:19 PM
|
#12
|
Senior Member
Join Date: Apr 2007
Location: Utah/Florida
Posts: 349
|
007,
Not to worry.....join the pusher club with the rest of us! It's only $$$$$ . You can get more later.........
__________________
2011 Tiffin Allego Bus 40QXP
450 hp Cummins ISL 9, Powerglide chassis
Toad, 2011 Honda CR-V
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|