|
|
05-16-2018, 07:54 PM
|
#1
|
Member
Join Date: Nov 2017
Location: Edgewood WA
Posts: 86
|
2008 Alpine electrical problem(Help immediately please)
My coach is dead in my driveway. I moved it and washed it two days ago and today nothing. My panel above the passenger seat says 110 is coming in. But no inverter. I've reset the panel in the utilities bay several times. Flipped the breaker off and on several times for the inverter, still nothing. Plugged it into a separate 7000 watt generator I have just to get 50 amp service and still nothing. Chassis batt's are dead but the house batt's show some juice. Still, no lights inside the coach. Fridge works, Microwave works, tv has power.... I'm at a loss and I'm due to leave Friday morning for a very important work trip for two weeks. I can't get into my bay drawers to pack even since they are hydraulic. HELP PLEASE.......
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
05-16-2018, 08:07 PM
|
#2
|
Senior Member
Alpine Owners Club
Join Date: Jun 2007
Location: Lake Wales, FL
Posts: 3,113
|
So you are getting 110 to the coach (fridge works, microwave works, tv has power). But you do not know if you have power to both legs of the 110. Regardless of that, is your charger enabled? What inverter/charger do you have? How do you know the house batteries show power? If your chassis batteries are dead you will not have power to your Vansco units (affecting the charging). You need to get an external charger on the chassis batteries so we can start determining the root cause of the problems. The root cause may be that you do not have 110 volts to both legs of the shore power.
__________________
Dave, Bobbi and Fenway
2005 38' FDTS Alpine Limited, 2016 Jeep Grand Cherokee Limited
Lake Wales, FL
|
|
|
05-16-2018, 08:20 PM
|
#3
|
Junior Member
Alpine Owners Club
Join Date: Mar 2015
Location: Edgewood, WA
Posts: 28
|
RS2000 says charger on (green light) I'm plugged into 110volts with a dog bone
Sorry I'm on my wifes computer now so it shows up as a different person...
__________________
Bob and Cindy King - 2007 Alpine limited LE 40 MDTS - Edgewood, WA
|
|
|
05-16-2018, 08:22 PM
|
#4
|
Junior Member
Alpine Owners Club
Join Date: Mar 2015
Location: Edgewood, WA
Posts: 28
|
do I need a 24 volt charger on the chassis batt's? I only have one for 12Volts
__________________
Bob and Cindy King - 2007 Alpine limited LE 40 MDTS - Edgewood, WA
|
|
|
05-16-2018, 08:28 PM
|
#5
|
Senior Member
Alpine Owners Club
Join Date: Jun 2007
Location: Lake Wales, FL
Posts: 3,113
|
So your issue could be the dog bone, we will have to see. Get a new one and see if that helps.
You need a 12 volt charger for your chassis batteries.
__________________
Dave, Bobbi and Fenway
2005 38' FDTS Alpine Limited, 2016 Jeep Grand Cherokee Limited
Lake Wales, FL
|
|
|
05-16-2018, 08:32 PM
|
#6
|
Member
Join Date: Nov 2017
Location: Edgewood WA
Posts: 86
|
I'll get a new dog bone. Until then do I connect the 12 volt charger to only one of the batteries? I assumed the cummins was 24 volt..
|
|
|
05-16-2018, 09:01 PM
|
#7
|
Senior Member
Join Date: Nov 2009
Location: Warren, Oregon
Posts: 2,559
|
Your chassis starting system is 12V.
2 stroker
__________________
2006 Country Coach Inspire 360 40ft Genoa Designer Series, Samsung 197 RR
Cat C9--STEEL & COPPER Bolt Together Radiator w/ updated rubber mounting
SilverLeaf 330 Magnum 2812 PSW 2011 Ford Edge Sport-Air Force One
|
|
|
05-16-2018, 09:12 PM
|
#8
|
Senior Member
Alpine Owners Club
Join Date: Jun 2007
Location: Lake Wales, FL
Posts: 3,113
|
The 12 volt batteries are in parallel, so you have double the amperage but still only 12 volts. You will be charging both batteries at the same time. Once those batteries are charged you will be able to see the power and other lights on the Vansco. Leave the charger on the batteries for 24 hours so they get fully charged. Once you remove the charger flip the chassis battery cut off switch, wait 30 seconds then flip it back on. That will reset the Vansco. After that you will have to look at the way the RS2000 in set up, mainly that the charger function in enabled.
__________________
Dave, Bobbi and Fenway
2005 38' FDTS Alpine Limited, 2016 Jeep Grand Cherokee Limited
Lake Wales, FL
|
|
|
05-16-2018, 09:51 PM
|
#9
|
Member
Join Date: Nov 2017
Location: Edgewood WA
Posts: 86
|
Thanks so far folks. Ran to the local Tractor supply store. Only one open this late that had a dog bone to fit. Connected it and all the lights came back on the Vansco unit. That's a start in the right direction. Interior lights back on. We'll see how we look in the morning for starting batt's. Fingers crossed. Unbelievable a simple adapter could knock me out like that. One of the blades of the old dog bone was black and clearly burned. Had no idea...
|
|
|
05-16-2018, 11:11 PM
|
#10
|
Senior Member
Alpine Owners Club
Join Date: Jun 2007
Location: Lake Wales, FL
Posts: 3,113
|
The lights came back on because you now have full power to your coach. The “dog bone” takes the power from one 30 amp circuit and connects it to both 50 amp legs of your coach power cable. This diagram shows how you get power to your coach.
You should also check the plug on your shore power cord, the blades should not be discolored. If they are you can disconnect the coach from ALL power sources, then clean the blades with steel wool.
__________________
Dave, Bobbi and Fenway
2005 38' FDTS Alpine Limited, 2016 Jeep Grand Cherokee Limited
Lake Wales, FL
|
|
|
05-17-2018, 09:08 AM
|
#11
|
Member
Join Date: Nov 2017
Location: Edgewood WA
Posts: 86
|
I let the coach sit all night on the 110v plug. It always charged it up enough the next day. This morning it's the same thing... Dead. I have it on my big battery charger now. I don't understand what's happened.
I'm going to try and get enough of a charge to get it started and at least close up the slides and go from there. I suppose today I'll try and find someone that does emergency house calls.
|
|
|
05-17-2018, 09:13 AM
|
#12
|
Senior Member
Alpine Owners Club
Join Date: Dec 2012
Posts: 545
|
Way to go DrDave . In less than 2 hours you have this guys power back and lowerd his stress level a bunch I'm sure. Thanks for all the help you provide on the forum. (do you do house calls?)
Oh no. Looks like my post came a little late and the power went off again. Sorry I don't have anything to add to help.
__________________
Carter & Patty
'05 Alpine Limited 36FDTS + '19 Jeep Cherokee
FMCA, ACA & NOWACA
|
|
|
05-17-2018, 10:14 AM
|
#13
|
Member
Join Date: Nov 2017
Location: Edgewood WA
Posts: 86
|
OK so the coach started and runs. So now what? How do I know that the same thing won't happen when I'm on my trip and plugged into shore power? I don't have 30 or 50 amp service here at out house so I only have 110 to rely on. And maybe that's the problem. How does a layman with no electrical troubleshooting background go about looking into this? Not likely I'll be getting any calls from local repair companies due to the time of year when everyone needs them..
|
|
|
05-17-2018, 10:16 AM
|
#14
|
Senior Member
Alpine Owners Club
Join Date: Jun 2007
Location: Lake Wales, FL
Posts: 3,113
|
Quote:
Originally Posted by Bking
I let the coach sit all night on the 110v plug. It always charged it up enough the next day. This morning it's the same thing... Dead. I have it on my big battery charger now. I don't understand what's happened.
I'm going to try and get enough of a charge to get it started and at least close up the slides and go from there. I suppose today I'll try and find someone that does emergency house calls.
|
Look at the new dog bone, are the contacts burned, discolored, etc. I am thinking the 30 amp plug you are using may be the issue, not the dog bone. The dog bone should NOT be hot nor the connectors at either end, be discolored (it is brand new). If the 30 amp plug you are using has corrosion or a loose connection it could burn up the dog bone as it passes current.
You have multiple connection that could be causing the issues.
1) the 30 amp plug on the wall. Bad connections to the wires or to whatever is plugged into it.
2) the dog bone. You just got a new one so that is most likely the symptom, not causing the problem.
3) your power cord. Are the plug blades clean and free of corrosion?
When AC flows wherever it meets resistance you will have heat. Without being there to see/feel the heat it is hard to determine the root cause. My opinion is that you have a corrosion problem some where in the 3 areas above. Placing a new dog bone in the mix last night decreased the resistance, but did not completely fix it. By replacing the dog bone (when you did that you detached the connections and effectively scraped them clean) you reduced the resistance in the line enough to allow things to operate, but as the heat built up the problem came back.
It sounds like you may have an Apex with Silverleaf, if so, and it is working, can you tell me what voltage it is seeing? If you do not have Silverleaf you could turn on the ignition, once the Actia has gone through its boot sequence (when it shows your mileage in the upper right hand corner it will show what voltage it is getting from the chassis batteries. What is that voltage and does it change over time (like 1 - 2 hours)?
Tracking this down may take some time, be patient, we will get it.
Dave
__________________
Dave, Bobbi and Fenway
2005 38' FDTS Alpine Limited, 2016 Jeep Grand Cherokee Limited
Lake Wales, FL
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|