Alpine fender manufacturer

[rjv1210]

While rebuilding my 02 36MDDS last summer, I came across a sticker on the back of the rear bumper. It seems that Amteck Corp., 180 East Jones Rd., Wapato, Wa., 98951 supplied all of the fiberglass parts, such as fenders, frt. gen. cover,and rear bumper [part # 65881]. At the time, I called them and they would not sell to me. But they may now. If anybody gets to Wapato, Wa., they could stop in and check them out. I'll be there on the way back from Alaska in the fall. The # is 509-877-2228. If someone does bust a fender or bumper, sweep up all the parts. A good fiberglass man can glue it back together. Hope this helps. Rick

[rjv1210]

While rebuilding my 02 36MDDS last summer, I came across a sticker on the back of the rear bumper. It seems that Amteck Corp., 180 East Jones Rd., Wapato, Wa., 98951 supplied all of the fiberglass parts, such as fenders, frt. gen. cover,and rear bumper [part # 65881]. At the time, I called them and they would not sell to me. But they may now. If anybody gets to Wapato, Wa., they could stop in and check them out. I'll be there on the way back from Alaska in the fall. The # is 509-877-2228. If someone does bust a fender or bumper, sweep up all the parts. A good fiberglass man can glue it back together. Hope this helps. Rick

[Beagle RC Air]

Rick,
This is very pertinent information! I just hope Amteck has the molds/slugs still in their possesion. You are right on target about rebuilding busted fiberglass parts.
Thanks!

[dgerstel]

Rick,

The problem would be that WRV most probably owns the molds. Wapato, is right between the factory and where the homecoming rally is next week.

Dale