cigarette lighter plug went dead?

[Mule Skinner]

cigarette lighter plug went dead?
Where can I find the fuse or breaker for this on my 04 34' ?
I only use this for my phone, but that's important

[Rick J Fisher]

Not sure about your '04 but on my '07 with the Vansco, just turn off the starter battery switch to kill the Vansco and when you turn it back on, the power outlet should work. There is no fuse.

[Wayne R]

Vanco reset should fix it,

[Mule Skinner]

I did turn off the ignition off and restart with out success.
I'll try it again.

Dan

[Alpine Road Warrior]

Not your ignition switch but your master shut off switch back by the batteries.

[Mike & Mike]

Mule Skinner,

Our cig lighter has a fuse in the black box behind and above the house batteries. The 'black box' is about 12" by 12" and maybe 2 or 3 inches deep. This fuse controlled our cig lighter outlet right by your right knee when in the drivers seat.

This fuse also controls the signal from the Cummins computer. In other words, the Cummins tech couldn't get Cummins computer info until he replaced that fuse.

I did phone WRV when this happened and they told me to turn off the main switch to reset the Vansco but that was not the answer for my rig.

Cheers!

[Mule Skinner]

Quote:

Originally Posted by Mike & Mike Mule Skinner, Our cig lighter has a fuse in the black box behind and above the house batteries. The 'black box' is about 12" by 12" and maybe 2 or 3 inches deep. This fuse controlled our cig lighter outlet right by your right knee when in the drivers seat. This fuse also controls the signal from the Cummins computer. In other words, the Cummins tech couldn't get Cummins computer info until he replaced that fuse. I did phone WRV when this happened and they told me to turn off the main switch to reset the Vansco but that was not the answer for my rig. Cheers!

I think this is what I needed,
Thanks Mike, or Mike ??