DIY Alpine brake bleeder Adapter
Here are some pictures of the adapters I made for power bleeding and changing the brake fluid on my Alpine. I made them from a #6 EDPM rubber plugs and a 2 inch long 5/16 brass bolt that I drilled a 3/16 hole in the center of. A couple of fender washers and 2 wingnuts. Drilling the hole in the bolt is the only tricky part if you don't have access to a lathe. total cost less than $10.
http://www.irv2.com/attachments/phot...d_addapter.JPG
Power Motive tank holding 15 PSI after 30 minutes.
http://www.irv2.com/attachments/phot...addapter_3.JPG
http://www.irv2.com/attachments/phot...addapter_4.JPG
http://www.irv2.com/attachments/phot...addapter_5.JPG
__________________
Wayne & Kathy
05 Alpine 40FDQS #75330 Towing 24' car hauler, 2012 Spyder, 2003 Harley FatBoy
|