Flexsteel Chair Arm sagging

[cajunjohn]

Hey Guys,
Anybody know how to adjust a drivers chair arm? One of my arms is now lower than the other one; how do adjust it?
Thanks!
jt

[Old Scout]

At the risk of being obvious--lift the arm to the vertical/fully-back position. Then move the arm toward horizantal while using the small lever inbedded in the end of the arm for downward adjustment. If this doesnt work you may have a problem with the internal arm mechanism.

[Algoma]

I have the same problem with my driver's seat and the old seats don't have the adjustment Old Scout mentioned. I just live with it.

["007"]

On my old coach Flex Steel chairs you would lift the arm straight up push in and reset arm at position you wanted it.
You could give Flex-Steel a call for more info if it doesn't work for you.
Brad & Hall also sells the adjustable arm maybe you can update your arms.

[takepride]

Though fussy, mine work just as 007 describes.

[Algoma]

John,
If you slide your hand along the inside of the arm you will feel the head of 2 bolts. I discovered mine were loose causing the arm to droop. You can slide a wrench in and tighten these and that should fix the problem.