Handle on the basement door

[nssracer]

I have a 2006 Alpine 40 FD and I broke one of the door handles on the basement door. Where can I get one of these? Thanks, Doug

[94-Newmar]

Post a picture of it, but Im going to assume it's most likely a Trimark assembly? You can pull the mounting cover from the back side to remove the latching assembly - there should be a make/model number on the inner housing. If it is a locking assembly you can give them your key number and they'll key for your existing keys - or a nearby dealer can change out the locking cylinder... not sure if they give out lock removal keys to owners.

TriMark Corporation - Latch, Handle, Linkage, Electronic, Hinge, Vehicle door hardware

[bruceisla]

Originally Posted by 94-Newmar

Post a picture of it, but Im going to assume it's most likely a Trimark assembly? You can pull the mounting cover from the back side to remove the latching assembly - there should be a make/model number on the inner housing.

TriMark Corporation - Latch, Handle, Linkage, Electronic, Hinge, Vehicle door hardware

After you get the hatch open ... at which point you realize the latch is a piece of junk.

[EngineerMike]

WRV used various Trimark latches in the early coaches and again later in the Apex & SE's. But the black oblong basement latches were made by Southco. You can do a search here on that name on that name & find how others have located sources for the part.

[nssracer]

Found the latches.

Call Perlane Sales, Inc.
4665 Allen Road
Stow, OH 44224
330.928.4866
1-800-783-7197
Craig is your contact
The latch is a Southco C5-31-45

$30 each plus shipping

[336muffin]

On the back of the handle assembly will be a part number, put this in the search window on Ebay. Just the number is all you need. Happy hunting.