HWH/Silverleaf interface on2006 Apex
You know the old saying about "Put a thousand monkeys in a room with typewriters, and eventually they'll write the New Testament"?
Well, I feel like I'm part of that....
My problem as you readers of some of my previous posts will remember, was that I couldn't get my jacks to activate, or my room slides to work, via the silverleaf: I talked to the folks at silverleaf, and HWH, pored over factory trouble-shooting guides, checked the Vansco, to no avail. All this time I have known that my primary pump motor didn't work, but was operating on the auxillary. So before biting the bullet, and taking the coach to an RV shop to try and remedy my problems, I decided that I could at least either repair or replace the primary pump motor. Mechanical stuff I can do; electronics, not so much. Long and short of it, I fixed the motor, but also ordered a new one just in case. I reinstalled the motor, and it worked. So as I tested it out, I used the remote Silverleaf controls just for grins, and...... everything works! Mind you, I had tried the same thing while on the aux. pump and didn't get the same results?
Anyway, I'm a happy camper...I think
2006 40' Apex MDTS