I have been into the LG Satellite Receiver (mine is an RCA receiver with an LG TV monitor) area probably 15 times for various reasons.
On our '06, I take the cabinet doors off (remove the screws from frame around the display panel), then remove the black display panel (4 screws, one in each corner), and let the display panel dangle from the attaching cords, while pulling out the receiver. The receiver is just setting on a lumber frame; may have some velcro holding part of it. Once it's out it's easy to check the connections.
Same procedure works for the cabinet on the other side of the TV in case you have to follow the wiring there, where there's more connections than on the passenger side.
BTW, if your cooling fans for the electronics are noisy, it's a good time to replace them when you have the doors and panels off.
__________________
2019 Winnebago 22M
2015 Jeep JK Rubicon
Former Owner, 2006 Alpine Coach 36MDDS
Former Owner, 2005 Tioga 31M and Arctic Fox 22GQ
|