Peak Chassis Wiring Diagram

[Dave&Kacy]

Does anyone have a wiring diagram for the Peak chassis?

[Dave and Jaime]

The electrical drawings (10 pages worth) for the 2003 Alpines are at the end of the owner's manual (pages 88-98). If you don't have an owner's manual, download it from the Alpine Coach Association website, under technical information.

[kraig]

With a 2003, you probably don't have Vansco, which I don't have. I have complete set of 12 volt chassis drawings, 4 sheets of 24x34 for a 2000 WRV. I don't know that much about computers, but I am sure they could be scanned, so they used on a computer.

[Dave&Kacy]

Freightliner caused severe problems with the 12volt chassis wiring recently and I am having another RV repair shop try to get the coach runniong again, but the ignition circuit to the alternator and back is not functioning. We are trying to find actual Peak chassis 12volt drawings.

[Dave&Kacy]

Thanks, but those diagrams are for the coach (or house) systems. Iam looking for the 12volt Peak Chassis diagrams illustrating the wiring diagrams between the dash and engine. Freightliner has fried several circuits trying to fix the brakes (long story - lawsuit to follow) and now we have the coach at another facility trying to chase down faulty wiring between the ignition and alternator and back to the dash circuits.

[kraig]

The drawings I have are the Peak Chassis drawings showing all the 12volt, including starting, charging everything for the whole coach.You can PM if you want.

[Dave&Kacy]

Quote:

Originally Posted by kraig The drawings I have are the Peak Chassis drawings showing all the 12volt, including starting, charging everything for the whole coach.You can PM if you want.

Thanks, I appreciate it. I need to get them to my service tech as soon as possible. What would be the fastes way?

[kraig]

I only have one set. I will have to take them by Kinko to print a set. Call me on my cell 503 358 2747.

[Dave Fernandez]

Kraig; Can I suggest that you have Kinko’s (if they can) scan them into a PDF document and you can email them to Dave and keep a set in your computer or Post them on the ACA Web Site.

[kraig]

That was my plan. Only problem is Kinkos did scan them into PDF and they got them too big to email. I may have to over nite the CD to David and he said he could change it and get it to Mike. These set of drawings should cover pre Vansco all models.

[Melorene]

I have a 34' 2008 model and sure would like to know how to get a set for my file.. Mel

[Basil Shannon]

Quote:

Originally Posted by kraig With a 2003, you probably don't have Vansco, which I don't have. I have complete set of 12 volt chassis drawings, 4 sheets of 24x34 for a 2000 WRV (2000 or 2007?). I don't know that much about computers, but I am sure they could be scanned, so they used on a computer.

Kraig, I'm confused. That happens a lot. Are the chassis drawings you have for a Vansco or a non-Vansco chassis? I'm hoping you have 2007 Vansco drawings. Much of the Alpine community would love to get hold of those.

[kraig]

Basil

I had a 2000 Alpine which I had a set for that was pre Vansco. David who had the electrical problem, said he would sent those to Mike. Now that I have my 2007, which I don't have set for. If somebody has Vansco drawings, maybe they sent it to Mike.

[EngineerMike]

Vansco Sufferers- there is an 08 Vansco Ladder Logic file on the Tech Library which has not only front & back LED Input/Output schedules, but also the "ladder logic" schematics for each programmed parameter. This file should be true for 06-ish and later coaches. 04's were a small amount different, but not a lot, and somewhere in 05-ish they quit screwing around w/mickey-mousey changes (I think, YMMV).

I also have full size schematics (30" x 40") of some of the Vansco chassis' wire looms w/plug-end diagrams (i.e. pin-out diagrams). I don't have all of them (boo-hoo). I'm going to figure out a way to make those reproducible and get them in circulation.

I also have 18"x24"-ish reproductions (paper) of the pre-Vansco rig's chassis wiring for $15 by mail or $10 at rallies, a bit higher for overnight- send me an email if you want a set at EngineerMike at Vagabondwater dot com. These are reductions of the full size 4-page set at the cost of the copies, but are still mostly readable w/out excessive brain damage, and usually fully decipherable w/some effort, but further scanning obliterates too much detail for that to be useful. This might be (paper reductions) what I wind up doing w/the 30x40 sheets since scans either lose a lot of detail or make file sizes that are too large for internet management.