Community Forums

Gary an Pat · 07-23-2011, 12:11 PM

this has to be really simple, on my 2006 Apex, when I go to the display of the Silverleaf functions on the TV screen, I get "s-video, no signal". I have shut off all power and restarted the system, read everything in every manual and cannot find how to restore the signal, or even where to look.

thanks

Coin-Op · 07-23-2011, 12:49 PM

This happened to me on our 06 Apex a few years back. The Silverleaf black box mounted behind the TV had a cable viberate loose. Once I found it it was a easy fix.

wa8yxm · 07-23-2011, 01:20 PM

The S-Video cable is a 4-pin Mini-Din (looks a bit like a PS/2 Mouse only 4 instead of 5 pins)

Use the INPUT button on the remote (A/V it may say) to get it off that screen if you have to.

S-Video is "Seperated Video" the 4 wires are Chroma, (Color info) Luma (Intensity info) and Ground Ground. First place I saw it was on Commodore 64 and Atari computers.

Basil Shannon · 07-28-2011, 09:49 PM

Quote:

Originally Posted by Coin-Op

This happened to me on our 06 Apex a few years back. The Silverleaf black box mounted behind the TV had a cable viberate loose. Once I found it it was a easy fix.

Check the connections both at the Silverleaf box and the TV. Also note that there are two s-video connections on the Silverleaf box. If all else fails, try the other connection.