 |
10-05-2011, 06:51 PM
|
#1
|
|
Member
Join Date: Jun 2011
Location: Salisbury, Md.
Posts: 31
|
Slide opening on own
Yesterday I noticed my forward passenger slide was open about 3 inches. I went in and closed it. This afternoon when I came home it was open again. I closed it again , went out to a meeting, and when I returned it was popped out again. Has anyone experienced this? Any idea what a solution might be?
I have a 2005 40 footer with 4 slides
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
10-05-2011, 07:50 PM
|
#2
|
|
Senior Member
Alpine Owners Club
Join Date: Aug 2007
Location: Long Beach, CA
Posts: 1,563
|
Probably one of four issues: - Leak in hose (I have that)
- Leak in valve at pump (backflow of pressure)
- Low fluid level (close slides, lift jacks, check level)
- Hooligan (your other half is messing with your mind)
First three are easily solved......
__________________
2003 Alpine 40FDTS (400HP)
Long Beach, CA
|
|
|
|
|
10-05-2011, 08:23 PM
|
#3
|
|
Senior Member
Alpine Owners Club
Join Date: Jun 2003
Location: Ontario, CA USA
Posts: 1,403
|
Run the Slide all the way out and in a couple of times that might help. Some times a small piece of dirt can get caught in the solenoid needle valve causing not to seal properly.  Running the slide in and out may clean the dirt out and will stop the creeping. Or it could be what Takepride mentioned. 
|
|
|
|
|
10-05-2011, 09:08 PM
|
#4
|
|
Member
Join Date: Jun 2011
Location: Salisbury, Md.
Posts: 31
|
Thanks guys I will try that
|
|
|
|
|
10-05-2011, 09:50 PM
|
#5
|
|
Senior Member
Join Date: Jun 2005
Posts: 1,957
|
Dave's suggestion always worked for me in that case. Its only happened once or twice and running it all the way out and back in just once fixed it. Hope your problem is that easy to fix.
__________________
Jim A
'04 Alpine Coach 36' MDDS
|
|
|
|
|
10-05-2011, 10:42 PM
|
#6
|
|
Senior Member
Join Date: May 2006
Location: Washington State
Posts: 870
|
Or it could just be a leaking solenoid valve that needs replacing. We had that problem, in reverse, in that the slide would creep in from the extended position. Had to replace the extend HWH solenoid valve.
__________________
2019 Winnebago 22M
2015 Jeep JK Rubicon
Former Owner, 2006 Alpine Coach 36MDDS
Former Owner, 2005 Tioga 31M and Arctic Fox 22GQ
|
|
|
|
|
10-07-2011, 02:29 PM
|
#7
|
|
Senior Member
Join Date: Feb 2005
Location: everywhere
Posts: 527
|
Quote:
Originally Posted by OldForester
Or it could just be a leaking solenoid valve that needs replacing. We had that problem, in reverse, in that the slide would creep in from the extended position. Had to replace the extend HWH solenoid valve.
|
We had the exact same problem... one of our back slides creeped in... we, too, had the solenoid replaced.
__________________
Jerry & Shirley Friedman
2014 Chevy Silverado 3500HD
2015 Mobile Suites 38RSSB3
|
|
|
|
|
10-07-2011, 03:45 PM
|
#8
|
|
Senior Member
Fleetwood Owners Club
Join Date: Aug 2011
Location: Vancouver Island Canada
Posts: 102
|
On my bounder you need to hold the retract button for 5 seconds after it is retracted to set the brake.
__________________
03 Fleetwood Bounder 35r
Ford V10, F53 Chassis
|
|
|
|
|
10-07-2011, 04:31 PM
|
#9
|
|
Registered User
Join Date: Jul 2011
Posts: 2,427
|
Same here, except I was going 60 mph and did not have
Slide locks on...If you have to travel to get it fixed, don't move until you have secured the slide. Sorry to state the obvious.
|
|
|
|
|
10-07-2011, 04:45 PM
|
#10
|
|
Senior Member
Join Date: Jun 2005
Posts: 1,957
|
There is no mechanical brake on this system to set. Strictly hydraulics.
__________________
Jim A
'04 Alpine Coach 36' MDDS
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
