Vansco Module Schematics

[EngineerMike]

I pulled the panel off the front dash ahead of PS seat, and to the inside is glued a sheet of schematics showing numbered circuits and their uses on the Vansco modules (PDM, Front VMM, Rear VMM). This is similar to the one posted here on the ACA Tech Library, tho not a 100% match.
Goofy thing- mine is dated 2003, but I digress.

Anybody else have a Vansco schematic mounted there (or elsewhere)? State year & model of coach please if not in your signature. Thanks, Mike

[Wayne R]

Mine has one there. Labeled 2005 Limited Series Vansco Front and Rear VMM and PDM #2725-67610-00

[bigfish]

If we are talking about the same thing it is a I/O (input/output) sheet. I made a copy of it in MS Excel format (appears to be same as original format). Can e-mail it to you if needed. It's for a 05 40FDQS.
BTF

[EngineerMike]

Big- Thanks for the spreadsheet with your schematic take-off.

If anybody else has a scan or photo of this Input/Output schematic, please email it to me at mike at fleming dot cc (not dot com), along with any info to date the document (your coach model year & build date if known, date of engine build from the serial # plate if you don't know coach build date...). Thanks. I'm trying to figure out what DIY diagnostics can be done incorporating the Vansco LED data.

BTW, 2002 & earlier coaches don't have Vansco multiplexing, so no need for you folks to dig. Some 2003 coaches may; you'll see the pot metal box with its LED readouts on the front bulkhead of the battery compartment if your coach is so equipped.