iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Sorry, I miss read your post, I thought you were talking about the front light not working. Ken's and Bob's solution will work, you just need to run a wire.
__________________
Dale Gerstel
AMG GTS
Las Vegas, NV
Had: 2007 Limited SE 40fdts
Thanks everybody for all of your help. I learned a great deal about 3 way switches. Ken & Nancy thanks for your input, it was the direction I was going.
Thanks again to all.
Alpine coaches come with three way switches - you can jury rig led lights at each switch by running a dedicated wire to the pump; however, if you want to add more switches, get the intelitec controller. The 15 amp version has an output that you can run to a light at each switch so you can tell if the pump is on from wherever. I have four switches with small Radio Shack led's at each switch.
Linear Mode
