Windshield Wiper Hose Attachment

[djdobbins1]

The small metal tube that the windshield washer hose attaches to before running out to the wiper blade has broken. There is just a small tube nub remaining and it is not long enough to attach the hose to. Has anyone encountered this and found a way to fix it?

[rrthor]

Does this help. See post 5.

http://www.irv2.com/forums/f104/wind...ms-245453.html

.: TAC :. Transportation Accessories Company - Nozzles

[Ret Syntst]

Here's a quick fix for the broken sprayer on the wiper arm.


Connect the hose for the washer fluid to the end of the terminal and then attach the terminal to the post on the wiper arm - adjust the angle on the post so that the washer fluid sprays on the windshield as the arm moves across it. Total cost? Maybe $0.25. Remove the blue insulating part and attach the wiper hose.

[djdobbins1]

The problem isn't with the spray nozzle. It is a metal tube that is broken where the washer hose attaches at the wiper mounting base base on the front of the RV. There is only a short nub of the tube remaining; not long enough to attach the hose to.

[cptdzl]

something like this?

http://store.amequipment.com/amfiles...90_BHF-1_1.jpg