|
I'd start at the load and work my way back to the source, but you could do some preliminary checks that might save some time. Somewhere and probably right below your DC circuit board (mine is in the basement behind the entry door) is a smaller one that controls the slide or at least that's where my main slide control is. Should be a fusible link or something there also, but here is the source voltage, assuming it's present. Now having said that, you can disconnect the leads at the slides power gear motor and see if there's voltage there while someone holds in the switch. From there, work your way back to the above source.
Give'er a go and let us know what you find out. Who knows, we may even be able to help you out some.
__________________
1998 36ft. National Tropi-Cal...Model 6350 on a 1997 Chevy P32 Chassis...7.4 Vortec Engine...4L80E Tranny...one slideout and a tag axle.
|