Keyless Entry Question

[bldr11]

I just purchased a 2006 National RV Tradewinds 40F motorhome. Does anyone in here know how to reprogram the keyless entry system? I have no idea of the manufacturer of the system and I do not have any of the paperwork for this. If anyone has the same motorhome with keyless entry, I would love to hear from you.

[bdpreece]

Possibly an SCS keyless entry. Try this;

FORGOTTEN PERSONAL ENTRY CODE
If for some reason the personal entry code has been forgotten, the Keypad can be reprogrammed with a new personal entry code via the following procedure.

1) Press and hold the YELLOW programming button on the Keyless Entry System Module and at the same time press and hold down the 1/2 button on the Keypad until the Keypad button lights start flashing (about 5 seconds). This will cause the Keypad to fotget the previous personal entry code and remember the factory default code (15371).

2) Cycle the ignition key to ON then back to OFF.

3) Enter the factory default code (15371) on the Keypad.

4) Within 5 seconds, press and hold the 1/2 button on the Keypad until the Keyless Entry System responds with LOCK-UNLOCK (about 2 seconds).

5) Enter your new personal 4-6 digit entry code. (Each digit must be entered within 5 seconds of the last digit entered.)

6) When completed, the keyless Entry System will again respond with LOCK-UNLOCK to confirm that your personal entry code has been programmed.