Living Room Slide

[rkscott]

When we extend the living room slide, the right side as you look at it from the inside appears to go out all the way. The left, however, appears to not extend so that the upholstered headers and jam do not fully make contact on the left side. Upon closer examination, a welded nut and adjustable bolt prevent this left side from travelling that extra 3/4 of an inch. The unit is level. Is it customary to make a mechanical adjustment to allow the maximum travel to seat the jam and header flush or firmly to the perimeter fixed walls? We are newbies and are trying to learn all the ins and outs of our Class A National.

[Richard S.]

See if this looks like your slide. link below

http://powergearus.com/documents/348.pdf

[Ken C]

We had a similar issue with our prior 01 NRV coach. Both ends of the main slide stopped before they reached full travel and the seal was not touching the wall inside. It is a fairly simple job to adjust the bolts so that the slide extends further. Just be careful not to adjust the bolts too far