Link in post #4 is no longer good. Basement door repair.

10-31-2011, 08:55 AM #
19
kenscomet
Member

Join Date: Jul 2006
Location: Highland Ca.
Posts: 47
Here goes the steel is 16 or 18 gage, 24in. x 4in. and as you can see by the pics. I matched the holes in the plate that mounts the shock to the door and staggerd holes from one end to the other. I used Gorilla Glue and screws to help secure the plate to the door. It seems to be working the doors have not gotten any worse. I did this back in Mid 08. Hope this helps Good Luck, Ken.
Attached Thumbnails