National RV parts

[tmw188]

Without reading back thru all the threads are body parts an issue with the Dolphins if you need some repair/replacement performed?


Sent from my iPad using iRV2 - RV Forum

[Scooter]

Yes....and no. Some parts are available at scrap yards that have a few Dolphins. A couple of them were shown as a link a day or two ago.

A good fiberglass repair shop can fabricate a compartment door.

[Lonesome54]

Help! Been trying to get things squared up on brother's coach need to find wiring harness for the 12 volt distribution board with possible pin out information as do not want to smoke the new board.
98 tradewind 39ft 300 cat pusher pulling a 2000 honda toad. Kinda scratching my head as to how to get the stuff working right. The old board had a jumper from one side to the gen/hydrolic pump power sorce. Would think that should not need jumpers on board anywhere if plugs ect set up right.

[Blue Ribbon]

I can only help you on wiring diagrams for my coach which is a 2005 Sea Breeze.

[chboone]

Originally Posted by Lonesome54

Help! Been trying to get things squared up on brother's coach need to find wiring harness for the 12 volt distribution board with possible pin out information as do not want to smoke the new board.
98 tradewind 39ft 300 cat pusher pulling a 2000 honda toad. Kinda scratching my head as to how to get the stuff working right. The old board had a jumper from one side to the gen/hydrolic pump power sorce. Would think that should not need jumpers on board anywhere if plugs ect set up right.

Don't know if this will help you. You can send a PM to member theberrys he has a lot of manuals and information for his 99 Tradewind.

[Theberrys]

Hi Guys

Here is a link to all the documents and a few more that came with my 99 Tradewinds. Hope something in there will be useful.
Dick

https://onedrive.live.com/?id=AE67FF...67FFF392766057

[racineka]

I need a lens cover for my porch light 4.25" X 2" Where could I get one?

[Richard S.]

What year and model is your motorhome. National RV used many styles of porch lights over the years.

[chboone]

Originally Posted by racineka

I need a lens cover for my porch light 4.25" X 2" Where could I get one?

If it's the one up high by the entry door, I got one at my local RV store. What model and year MH do you have?

[two slides]

Originally Posted by racineka

I need a lens cover for my porch light 4.25" X 2" Where could I get one?

size sounds like one i replaced august last year. try here


www.dobsoncmpr@windstream.net

here is phone# (270)465-6919 located in Kentucky.

$12.95 plus shipping

I found him on EBAY website last year --may still be there

[Lonesome54]

well on wire set up still needed jumper but fixed it through a different point, think am going to have to get wire harness for the darn board as pervious owner cut wires and such. Not sure what he was thinking... have found 85 cent valves in hard to get places (plastic cheap stuff) replaced them and have tore out shower as it was NOT SEALED and had rotted out floor in the area. ...

[DWAlthaus]

The Gambler did buy a lot of National RV parts. Mostly trim material and misc boxes of junk. He hauled the stuff to Apple Valley CA and had it stored in trailers and outside in piles. When I visited him about two years after National RV closed, he was in poor health but still collecting and building more storage areas. He died a few years ago but the business is still going on under the name "Gambler". They also have a large assortment of parts in their store in Quartzsite AZ. The parts specific to National RV. Are in the third building back. The Gambler was a real character. Wore big gold chains, gold pinky rings, and stood about 5' 4" tall. My description of him was a "Banty Rooster" but a nice guy. A real wheeler and dealer.

[astac5]

Looking for back parts for a 2005 seabreeze

[Richard S.]

what are back parts