Sink Covers

[Warden]

Looking for Corian Sink Covers for a 2006 National Sea Breeze 1350....... I have been all over the web to see if there is a supplier for the covers, if anyone has a hint as to where you can get them, please let me know...... I have found all kinds, but nothing that the Wife would want.....or I may have to have them made at a counter top place if they can come close to matching the color............

As always thanks for the info.

[Richard S.]

Corian sink covers were not an option for the Seabreeze or LX. If you check with some of the former National dealer’s parts departments they may have some from higher end coaches. I think if you are set on corian you will need to have them made for you.
Good Luck,
Richard

[Warden]

Thanks again Richard, this is the second time you have helped me out... I appreciate all your help............ I sure am glasd I joind this group. At least the wife will be happy that I am able to answer her question.

Quote:

Originally Posted by Richard S. Corian sink covers were not an option for the Seabreeze or LX. If you check with some of the former National dealer’s parts departments they may have some from higher end coaches. I think if you are set on corian you will need to have them made for you. Good Luck, Richard

[JVJ]

Check with your local Home Depot or Lowes as to having some covers made to fit. You can take in a pattern made from cardboard as a template. And should be able to find a close color match from the samples in the store.
OR:
I have seen two other types of covers made for the purpose of sink covers.
One was the use of a standard white cutting board, The owners purchased the cutting boards, then using a template made from cardboard traced out the needed size to fit as a sink over and cut them out with the use of a jig saw. Then drilled about a 1" hole off to the side to use a a finger hole to pick up and remove the cover. They took the time to lightly sand down and finish off the ends and it looked very nice. As an added benifit they also could use the underside as a cutting board when needed.
The other covers were made along the same route, but were made out of wood that matched the cabinets. They said they had a local cabinet builder fab them up...they looked pretty nice. Gave the kitchen counter tops a different look, in a good way.
But everyone has their own taste.
Good Luck,

[Warden]

Thanks for the input, I like the idea of the plastic covers ....... see what the wife has to say.....see what home depot and lowes has that I can make some out of.

Thanks again for the Help

[Warden]

Found a site that will do custom cuts for plastic cutting boads, if anyone is interested.... may have one cut to fit the sink.

cutting boards, plastic cutting boards, poly cutting board, sanitary cutting boards

[two2go]

Our coach came with wood cutting board sink covers. They mostly ride along under the couch.

[Jeepster47]

Warden,

Our 2005 Dolphin came with maching Corian covers for the sink. I think they were cut-out from the original counter top. Where are you located? I could make a template of the 2 pieces if they match ours and I know of a local Corian fabricator near us in Azusa, CA.

Ed

[Warden]

Thanks......for the idea and the help...my location is Massachusetts, I have a place out here that may do the same thing,,,,, going to check with them next week.... if I don't make out so good , I will get back to you.....thanks again for the help and suggestion

Quote:

Originally Posted by Jeepster47 Warden, Our 2005 Dolphin came with maching Corian covers for the sink. I think they were cut-out from the original counter top. Where are you located? I could make a template of the 2 pieces if they match ours and I know of a local Corian fabricator near us in Azusa, CA. Ed