slide out wiring

[jimburr1]

i have a 2005 seabreeze mod# 1321. slide outs stoped working,. checked power board all seemed to be ok. took back off monitor panel to check slide out key lock switch wiring. found wires to back of switch were broken. the problem is , i can only find one wire. i found the red power wire but cannot find any other broken wires. the switch has two terminals and i'm assuming that the other lead is ground. i cannot, however find where it was attached. if anyone knows this system please help. thanks. jimburr.

[Richard S.]

Just went out and looked at my slide switch. The keyed switch has 2 wires, one from a connector for power and the other is a short jumper that connects to both slide switches center connection. The jumper wire is a 3way Y type connection.