Taillight assemble

[DALarry]

I have a 2007 Pacifica and the right taillight assembly is bad. Where do I get a new?

[texnet]

Look on the lense for a SAE Number. Then search that number using google or yahoo. From the info that is returned from the search you should be able to determine what the lense was originally made for.

[wa8yxm]

Describe the light: One common tail Light assembly is a sealed lamp/lense job about 3 to 4" in diamater (not sure without a tape measure or ruler) that fits in a rubber grommet.

Any truck stop should have it. I got my LED replacements at Flying J

Other assemblies may be harder to find.

[Vegasdan]

After looking at a 07 Pacifica brochure I think it is fairly similar to the Ford E350 Ecconoline Van taillight that National used for quite a number of model years. The only difference is where the top fiberglass of the end cap angles downward on the top part of the taillight. Check to see if the fiberglass angle is mearly covering up a small part of the actual lense for the sake of "style". If this is what they did then the replacement is simple, the Ford unit.