Community Forums

gonational · 07-24-2013, 10:52 AM

Hi to all,,Hope all you traverlers are having a great time this year..
My question is in the water inlet and dump valve area.
I have the 2004 Dolphin LX6342, there is a hose connector up in the right corner of the compartment, It has a cap on it and along side this connector it says inlet to pump. Is this my black tank flush connector?

96 Wideglide · 07-24-2013, 11:08 AM

No. Thats for sucking pink antfreeze into your pump/ lines for winterizing.
If your panel is like mine, your black tank flush shoud be labeled near the top, on the left side.

gonational · 07-24-2013, 11:11 AM

I'll go look,,,brb.

gonational · 07-24-2013, 11:14 AM

Sure enough,,,I must be blind..who doesn't look at the whole area..Oh well, Thanks Wideglide....and it even says Sanitize Flush....

**TonyDi** · 07-24-2013, 11:18 AM

I can't comment on your MH, but the black tank flush goes directly to the tank not through a pump. I would attach the hose to this inlet and turn the water on. If you hear water flowing it is most likely into the black tank. Just make sure the water in not entering your fresh water holding tank. If it is entering your fresh water tank then this is your fill inlet. BTW not all MHs have black tank flush systems. Is this the inlet you use to fill your fresh water tanks or is there another inlet for that?

M&EM · 07-24-2013, 04:16 PM

The OP has found the right connection for sani flush! It does goes thru an anti siphon device hidden in the bathroom wall before it feeds the black tank.