Wheel Simulator Missing Part

[wagatlen]

I have a 2000 SeaBreeze 1331 (Ford Chassis). One of the two jam nuts that holds the wheel simulator on the front wheel has lost its cover. It happened because the tire man put it on with an impact driver and thereby loosened the cover which later feel off on the road.. I don't know who manufactured these covers so I don't know where to look. I have exhausted online searches and catalogs with no success. The cover had a dimple on it so it was easy to spot which were the correct nuts. For the time being I will use one off the rear wheel since it won't show as much.

[wa8yxm]

Your dealer will have replacement nuts, cover and all, should run less than 15 bucks (Way less) keep the old nut though as you never know when a spare will be handy.

NOTE: Take one of the other nuts with you... Dealer for my rig has nuts labeled as to what they fit.. Save they are labeled WRONG

Having one in my pocket meant I got the right part.

[Richard S.]

This should be them Stainless Steel Custom Lug Nut Covers - Product - Camping World

[wa7hra]

Try www.dicor.com Dicor was probably the OEM.

Bob, wa7hra

[Vegasdan]

I contacted Dicor when I had one on my Tradewinds that went missing and CW didn't have my size. They will ship but mine were a little spendy. I'd advise you to get a couple just to have one on hand. BTW I've seen some of these in large truck stops as well.