Quote:
Originally Posted by twirtcabal
Damion is correct. And it is a bi... to fill. I tried building a tubing but the fluid container is higher and by time you get a flow from the bottle of fluid, you cant see what is going on. I hope someone can figure this out. I got frustrated and just used an entire bottle fo fluid before it filled completely.
|
All of the fluids on mine are a Bi____ to fill! I have a funnel that 5/8" heater hose will slide onto! Three peice's of hose 3' long! One with a 1/2" Sweat 90 Deg on the end for washer fluid, one with 6-8" of 1/2" rigid copper on the end for Transmission, and one just the hose for engine!
__________________
2003 National Tradewinds LTC 7374 FL XC-Chassis IFS, Steer Safe, 8.3 ISC 350 Cummins, 3000MH Allison, 2023 Equinox, Blue Ox Tow-Bar, Brake Master Air Over Hyd
|