2018 40 AP Advanced Monitor System

[brandall]

I am doing a PDI on a new 40 AP that has the advanced monitor system with a remote co-pilot screen. The main screen seems to have some items disabled, such as the "accept" icon on the startup screen. It is accessible through the secondary screen. Is this a "feature" for safety/distracted driver reasons or an issue with the main screen that hosts the Rand McNally GPS?
Any guidance would be appreciated. Thanks

[luvlabs]

Your best bet is to call Tiffin and ask to talk with the expert on the system. I would imagine that there are very few of these systems in the field yet and the expertise is in Red Bay.

[brandall]

The main gps/radio screen is not aligned. Everything is about an inch lower on the main screen than it should, limiting the "touch" area to the upper 2/3. Fortunately the remote screen at the co-pilot station allows full control.
This all came about as a result of having a bad control unit exchanged and the supplier sent one that was designed to drive a larger screen. The existing screen is not configurable so the search is on for the proper control unit.