Front amber turn signal lenses?

[CUCWV]

The light is not working. This is on a 2007 Allegro Bay. How is the amber lenses attached? I do not want to damage anything getting to the bulb. I don’t see any screws. Looks like a small tab on the side of the lenses, maybe there to be used to pry off. I cannot access the bulb from the rear of the light housing. Thanks

[paz]

I'm not familiar with the specific light used on the '07 Bay, but most turn signals these days are accessed from the rear. The light sockets usually have 1/4 turn bayonet connectors fastening them in through the back of the light housing.

Access the rear of the light housing either by sticking your head and arm up inside the front cap or in through the hood opening. You may also have to remove the grille to be able to reach. The grill of our '05 is held in by 4 or 6 screws.

[MuckSavage]

X2 what Paz said. Access it from the rear. Lay under the coach & reach up.

[CUCWV]

Thanks... just spotted it ... a long reach it is... guess I will try to also fix the loose headlite housing to... glad I did not pry on the lense..... Hal