I discovered my head lamps are miss adjusted when driving it at night for the first time. From what I can see, the only way the correct the alignment is to unscrew the assemblies, reposition them to aim properly, then drill new holes for proper mounting alignment. Anyone know anything different?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
There are no possible adjustments to the headlamps without re-positioning the entire headlamp assy, which involves re-drilling the mounting holes in the aluminum brackets attached to the
front cap. There is an adjustment screw at the top of the headlamp, but this this is the (only) attachment point for the headlamp. Seems like a really poor design to me. I'm looking for a way to attach auxiliary lamps that offer better lighting and adjustment.
There are no possible adjustments to the headlamps without re-positioning the entire headlamp assy, which involves re-drilling the mounting holes in the aluminum brackets attached to the
front cap. There is an adjustment screw at the top of the headlamp, but this this is the (only) attachment point for the headlamp. Seems like a really poor design to me. I'm looking for a way to attach auxiliary lamps that offer better lighting and adjustment.
I find that hard to believe. You should have two adjustments, but at a minimum the up/down adjustment. Are you sure that one screw does not move them? Is there anyway you can post close up pictures?
Yeah? When I pulled the assy the headlamp was attached by one bolt on top. There were no adjustment anywhere. Recently, I came across another model like mine and stopped at the rv service shop to check it out. Again, no adjustments. I'll try to get a picture and post it.
Linear Mode
