Community Forums

SLVrver · 07-25-2019, 10:51 AM

I think the control panel needs to be replaced, but I can't find any information on line. Any idea if that can be replaced or fixed? I bought my unit (2005
allegro 32BA) 6 years ago, leveling system has been hard to turn on most of the time. Now it won't turn on at all.

luvlabs · 07-25-2019, 12:15 PM

Sorry but your system is out of production and no longer supported. Jacks can be found but electronic components are really hard to come by. You might want to start looking at HWH as a replacement.

Revconguy · 07-25-2019, 04:48 PM

You can often find them available on Ebay.

gabeears · 07-26-2019, 03:49 PM

Do you have the electric jacks? If so, I have a control panel that might work. Greg

jackgeorge · 08-09-2019, 03:29 PM

I have a 2006 Allegro bay 37 QDB and the electronic control board burned up do to large draw from one motor and there is not fuse in series with each motor, just the complete feed fuse. So any way I have the unit upgraded to the newer system. Complete change out of all components by Tiffin at Red bay by there service department. Best pricing at that time. I have heard that Tiffin no longer does service work only Warranty work. Maybe some outside service in the Red Bay area could do the work. Good luck.

riverat · 08-18-2019, 12:37 AM

Quote:

Originally Posted by gabeears

Do you have the electric jacks? If so, I have a control panel that might work. Greg

I'm interested if you still have the controller.

Garry D · 08-18-2019, 08:25 AM

I have had issues with these jacks but a few years ago I pulled the jacks off and took the motors off them and had the bushings replaced with bearings and they have worked great since then. I have also got relays for the control panel and replaced ones that burned out. This was on a 2008 phaeton