|
03-17-2018, 05:26 PM
|
#1
|
Junior Member
Tiffin Owners Club
Join Date: Mar 2018
Location: Phoenix, AZ
Posts: 6
|
Pull out under kitchen sink
Hoping someone has figured out how to remove the large pull out under the kitchen sink on an Allegro Bus. We have a 2014 45L.P. And the track that holds the big two tier pullout under the kitchen sink has come loose at the back. Thought it would be installed like the drawers with the black release levers at the end of the rail it slides in but it's not. Anyone know how this big "drawer" can be removed so we can reach the back of the track and replace the loose screws?
Thanks in advance!
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
03-17-2018, 05:29 PM
|
#2
|
Senior Member
Join Date: Jan 2015
Location: Oroville, CA
Posts: 3,133
|
Not sure what slide you have but if they are like mine in the S&B, pull out and at the end of travel, pull up and the slide comes out.
__________________
Bill, Kathi and Zorro; '05 Beaver Patriot Thunder
2012 Sunnybrook Harmony 21FBS (SQEZINN)
2007 Jeep Grand Cherokee Overland
|
|
|
03-17-2018, 10:38 PM
|
#3
|
Senior Member
Newmar Owners Club
Join Date: Mar 2011
Location: Draper, UT / Palm Springs, CA
Posts: 379
|
Pull out under kitchen sink
If it is the same as mine, the slide rails are different than all the rest of the drawers, so you have to pull it all the way out. Then lay on the floor with a light and a short Phillips head screwdriver. Then take out the 3 or 4 small screws on each side that go into the wood on the slide bottom. Then remove the very heavy drawer.
__________________
Tad & Carol
2024 Entegra Anthem 44D
2020 Jeep Wrangler Rubicon Unlimited
|
|
|
03-18-2018, 07:52 AM
|
#4
|
Senior Member
Entegra Owners Club
Join Date: Jul 2011
Location: If I'm not here, I'm somewhere else.
Posts: 1,222
|
Quote:
Originally Posted by tqqest
If it is the same as mine, the slide rails are different than all the rest of the drawers, so you have to pull it all the way out. Then lay on the floor with a light and a short Phillips head screwdriver. Then take out the 3 or 4 small screws on each side that go into the wood on the slide bottom. Then remove the very heavy drawer.
|
X2. I did it a couple months ago and it was a "pain". I don't want to do it again.
__________________
Ken & Laurie
North in summer, Home in Silver Springs, FL in the Winter
2022 Riverstone 39RKFB - 2022 RAM 3500 Dually Laramie
|
|
|
03-18-2018, 09:42 AM
|
#5
|
Junior Member
Tiffin Owners Club
Join Date: Mar 2018
Location: Phoenix, AZ
Posts: 6
|
Yikes! I was afraid of that!! Looking at the underside there's one screw that's not accessible with even the shortest phillips head. Will see if I can get a right angle driver to work.
Thank you for the solution. Was hoping it would be something simple I was overlooking but simple doesn't seem to apply too often on these....
|
|
|
03-18-2018, 09:50 AM
|
#6
|
Senior Member
Tiffin Owners Club
Join Date: Sep 2016
Location: Olalla , WA
Posts: 258
|
I took mine out due to all the wasted space around it. Like in an earlier post while laying on your back there are a number of screws that hold the wood assemby to the slider track. Once removed you can lift it off. I found the top sliding drawer was too short to hold any cleaning supply. Once I removed the tracks I could easily slide 2 bins 11x17 ( to hold bottled water , soda's ets etc ) , a small round tub to hold cleaning supplies, a rectangular garbage can and a small recycle tub as well.
__________________
Rod & Shelly Ladd & a dog named Blu
2020 Tiffin Allegro Bus 45 OPP
2021 Jeep Wrangler Rubicon Xtreme Recon Edition
|
|
|
03-18-2018, 04:00 PM
|
#7
|
Junior Member
Tiffin Owners Club
Join Date: Mar 2018
Location: Phoenix, AZ
Posts: 6
|
Quote:
Originally Posted by RodneyLadd
I took mine out due to all the wasted space around it. Like in an earlier post while laying on your back there are a number of screws that hold the wood assemby to the slider track. Once removed you can lift it off. I found the top sliding drawer was too short to hold any cleaning supply. Once I removed the tracks I could easily slide 2 bins 11x17 ( to hold bottled water , soda's ets etc ) , a small round tub to hold cleaning supplies, a rectangular garbage can and a small recycle tub as well.
|
Great idea. As pretty as that rollout drawer looks, it's not very practical with the exception of the section that holds the sink covers. And the sink faucet sprayer hose seems to always get caught in it. Will check out some retrofit possibilities when I get it removed. Thanks for the tip
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|