I have a 2013 35 QBA and had to replace the limit switch. You get to that from the inside by taking of the wooden panel under the fridge. You then take out I believe the 4 screws that hold the rear plate on. It might be 2 screws. The rear plate has the ducts attached and the ducts on mine were long enough to swing the plate out of the way to access the limit switch. To get to the other components you remove the outside cover. Once you take the 4 screws out the cover was almost like glued on with a bead of silicone, but it does come off if you take you time and work your way around the perimeter gently pulling it away from the paint as you go. I did not have to remove mine but I am sure you would have to take the gas line off first and then remove whatever screws are in the bottom front lip.
|