RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Tiffin Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-25-2016, 10:00 PM   #1
Senior Member
 
bonabob's Avatar
 
Tiffin Owners Club
Join Date: Nov 2010
Location: Naples, FL
Posts: 178
TV Distribution

We have a 2013 Allegro 36L. There are three tv's in the coach and one down below which I just attempted to hook up. Before I connected the TV down below, everything was working perfectly. The coach has a tv distribution system with 1 hdmi connection going to each tv and 1 component connection (3 video cables and 2 audio cables) I have the hdmi cable connected to a comcast dvr. I have the component cables connected to the directv dvr. The three tv's display each dvr on a different input source. However when I connected the cables to the TV down below, it knocked out the hdmi comcast dvr to all of the tv-s. However, by just disconnecting the hdmi cable from the tv down below, the signal came back to the 3 tv-s in the coach. I don't think it is a short in the system because the short will continue to knock out the 3 tv-s in the coach even when it is not connected to the tv down below.
Any ideas. Appreciate any thought or testing I might do.

Thanks,
Bob
__________________

bonabob is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-27-2016, 03:14 PM   #2
Senior Member
 
Budski's Avatar
 
Join Date: Oct 2013
Location: Palm Bay FL
Posts: 174
Check to make sure all the HDMI cables are fully plugged in and that none are broken. I have a 2013 40QBH and the TV and DVR connections are all jammed into a space way to small. They changed the setup in the 2014 and on models. If you have to bring it to a dealer, take a picture of all the wiring before hand, it may pay off
Budski is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What size weight distribution? jtbuilds Outdoors RV Owner's Forum 9 11-24-2015 07:34 PM
Eaz Lift Weight Distribution Hitches RVupgrades Vendor Spotlight (Deals, Announcements & More) 0 08-13-2015 02:13 PM
TV signal distribution box artgpo Winnebago Industries Owner's Forum 10 06-14-2015 06:31 PM
Oasis Distribution System Leak? millerj Newmar Owner's Forum 11 11-30-2014 10:44 AM
Weight Distribution Spreadsheet Calculator davidgeminde Trailer Towing and Tow Vehicles Discussion 1 05-31-2014 08:37 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:23 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.